Characteristics and performance of carabiner remodeling using 3D printing with graded filler and different orientation methods
MA Muflikhun, DA Sentanu - Engineering Failure Analysis, 2021 - Elsevier
A carabiner model was used to observe the characteristics of the filament deposition
process, the performance of the carabiner after printing, and the remodeling of the carabiner …
process, the performance of the carabiner after printing, and the remodeling of the carabiner …
Effect of multi-infill patterns on tensile behavior of FDM printed parts
Abstract Fused Deposition Modeling (FDM) is an extrusion-based additive manufacturing
technique which growing rapidly due to its ability to fabricate complex parts directly from …
technique which growing rapidly due to its ability to fabricate complex parts directly from …
Effects of the infill density on the mechanical properties of nylon specimens made by filament fused fabrication
S Terekhina, I Skornyakov, T Tarasova, S Egorov - Technologies, 2019 - mdpi.com
Additive manufacturing of polymer products over the past decade has become widespread
in various areas of industry. Using the fused filament fabrication (FFF) method, one of the …
in various areas of industry. Using the fused filament fabrication (FFF) method, one of the …
[HTML][HTML] In the mix: The effect of wood composition on the 3D printability and mechanical performance of wood-plastic composites
The material composition of 3D printed elements has enormous influence on the qualities of
the final product–it is decisive in determining the mechanical performance, aesthetic …
the final product–it is decisive in determining the mechanical performance, aesthetic …
[HTML][HTML] Extra-wide deposition in extrusion additive manufacturing: A new convention for improved interlayer mechanical performance
Recent studies have contested long-standing assumptions that mechanical anisotropy is
caused by weak interlayer bonding and demonstrated that microscale geometry (the groove …
caused by weak interlayer bonding and demonstrated that microscale geometry (the groove …
Effect of variable infill density on mechanical behaviour of 3-D printed PLA specimen: an experimental investigation
Fused deposition modelling (FDM) is one of the additive manufacturing technique, widely
accepted due to its 'easy to use'technology. The set process parameters during FDM …
accepted due to its 'easy to use'technology. The set process parameters during FDM …
A review on microstructural formations of discontinuous fiber-reinforced polymer composites prepared via material extrusion additive manufacturing: fiber orientation …
Z Wang, Z Fang, Z Xie, DE Smith - Polymers, 2022 - mdpi.com
A discontinuous fiber-reinforced polymer composite (DFRPC) provides superior mechanical
performances in material extrusion additive manufacturing (MEAM) parts, and thus promotes …
performances in material extrusion additive manufacturing (MEAM) parts, and thus promotes …
Effect of filling percentage and raster style on tensile behavior of FDM produced PLA parts at different build orientation
The most extensively adopted additive manufacturing process now a days is fused
deposition modelling (FDM) due to its wide adaptability, rapid production, low maintenance …
deposition modelling (FDM) due to its wide adaptability, rapid production, low maintenance …
Re‐entrant auxetic structures fabricated by fused deposition modeling: An experimental study of influence of process parameters under compressive loading
S Vyavahare, S Kumar - Polymer Engineering & Science, 2020 - Wiley Online Library
The present article is focused on investigating the influence of process parameters under
compressive loading in case of reentrant auxetic structures fabricated by fused deposition …
compressive loading in case of reentrant auxetic structures fabricated by fused deposition …
A numerical and experimental study of the compression uniaxial properties of PLA manufactured with FDM technology based on product specifications
JM Mercado-Colmenero, MA Rubio-Paramio… - … International Journal of …, 2019 - Springer
This paper presents a numerical and experimental study of the compression uniaxial
properties of PLA material manufactured with FDM based on product specifications. A first …
properties of PLA material manufactured with FDM based on product specifications. A first …