Lignin is the second-largest plant polymer on Earth after cellulose. About 98% of lignin
produced in the papermaking and pulping industry is used for combustion heating or power …

The utilization of synthetic, natural, and waste fibers in asphalt mixtures is constantly
increasing due to the capability of fibers to improve the mechanical performance of asphalt …

This paper primarily examines the flowability, physical appearance, mass loss, residual
compressive strength (RCS), and residual flexural strength (RFS) properties of steel (ST) …

Porous asphalt pavement is widely used due to its adequate water permeability, noise
reduction and skid resistance. The study aims at exploring the potential of using the crumb …

Fiber addition could enhance the permanent deformation and crack resistance of the asphalt
mixture. Previous research has found the effect of fibers on asphalt mixtures, while bamboo …

In order to improve the low-temperature crack resistance of the permeable asphalt mixture,
five steel slags with equal volumes of substitution rates (0%, 25%, 50%, 75%, 100%) were …

Incorporating different fibers contributes to improving the properties of asphalt materials. In
this study, chopped basalt fibers (CBFs), flocculent basalt fibers (FBFs), lignin fibers (LFs) …

Numerous studies showed that synthetic fibers are effective for reinforcing the mechanical
performance of the asphalt mixture due to their high strength properties, ductility, and …

Ravelling, which is defined as aggregate loss from an asphalt surface, is one of the modes
of failure of flexible pavements in both highways and airport pavement surfaces. Ravelling is …

This paper conducts a thorough review of the literature on the feasibility and current state-of-
the-art incorporation of basalt fiber (BF) into asphalt pavement materials, focusing on fiber …