Ternary composites consisting of polyoxymethylene, polyurethane (PU), and boehmite
alumina were produced by melt blending with and with out latex precompounding. The latex …

Aluminum oxide (Al2O3) nanopowder was synthesized using AlCl3 „ª6H2O as the starting
material by the aqueous based precipitation method and applied in removal of Cr (VI) ion …

摘要聚合物在室温甚至低温条件下的蠕变被认为是制约其更广泛应用的主要瓶颈之一.
实验研究发现添加很低含量(1% 重量或体积含量) 的纳米颗粒, 在基本上不影响基体其它机械和 …

The effect of zinc oxide (ZnO) 250 nm on the mechanical, thermal and morphological
properties of the composites of poly (styrene-co-acrylonitrile)(SAN), poly (methyl …

In this work, carbon nanotubes (CNT) filled polyetheretherketone (PEEK), with CNT contents
ranging from 1 to 5 vol.%, were compounded by a ball milling process performed under …

Polystyrene from packing materials (rPS) was reinforced with 1, 3 and 5% of silica prepared
by the sol-gel method, through a blending process. The thermal, morphological and …

Nanocomposites composed of PS and surface-coated MgCO3 were produced by melt-
compounding in a laboratory kneader. The amphiphilic acrylate copolymer-coated MgCO3 …

An epoxy resin (Epon 828) was filled with single-and multiwalled carbon nanotubes
(SWCNT and MWCNT) in two steps by using the high shear mixing and ultrasonication …

Polymer nanocomposites offer remarkable enhancement in properties compared to pristine
polymers, and also compared to conventional micro-and macro-composites. The present …

Binary composites composed of polystyrene (PS) and a synthetic boehmite alumina were
produced by using the water-mediated melt compounding (WMC) and direct melt …