The oxidation behavior of Ti55 alloy and TiBw/Ti55 composites at temperatures ranging from
960 to 1000° C was investigated by characterizing the surface and cross-section …

Laser shock peening (LSP) with nanosecond or femtosecond laser pulses is applied to
improve the mechanical properties of metallic materials. Thus, it is necessary to compare the …

Surface polishing is a critical factor in optimizing the practical utility of laser additive
manufacturing (LAM) parts. This study explores the use of nanosecond pulsed lasers for …

Laser-induced shockwaves can modify the mechanical properties and plastically deform
sheet metal in a process called Laser Shock Forming. This process has proven to be a …

Initial oxidation behaviors of (Ti 5 Si 3+ TiC)/Ti6Al4V composites were investigated using the
simultaneous thermal analyzer in air for 2 h at 700° C, 750° C and 800° C, respectively …

Titanium (Ti)-based alloys wield unique combination of mechanical, chemical, and high
temperature properties, which place them at the forefront of engineering applications …

The laser parameters and additive materials were investigated for the laser–additive
manufacturing of titanium alloys. A pre–placed metal–strip–based method for 3D printing …

In this paper, the influence of the thickness of the oxide film formed on the surface of TC4
titanium alloy after high-temperature oxidation of the laser transmission welding of titanium …

The hot corrosion and high temperature oxidation performance of the TiBw/TA15 composite
were tested at 1073 K for up to 100 h. The final mass gain caused by the high temperature …

In order to improve the high temperature oxidation resistance of Ti6Al4V alloy, the in-situ TiN-
Ti composite coatings were prepared with Ti-Cr-Ni-Nb powders by plasma transferred arc …