[HTML][HTML] Enhanced adiabatic shear band susceptibility in Ti composites reinforced with quasi-continuous network of graphene nanosheets
Graphene nanosheets (GNSs) can remarkably advance the mechanical properties of
titanium metal matrix composites (TiMCs) by forming a quasi-continuous network …
titanium metal matrix composites (TiMCs) by forming a quasi-continuous network …
Investigation of Microstructure, Mechanical and Wear Behaviour of B4C Particulate Reinforced Magnesium Matrix Composites by Powder Metallurgy
In the present study, magnesium and magnesium matrix composites reinforced with 10, 20
and 30 wt% B 4 C particulates were fabricated by powder metallurgy using hot pressing …
and 30 wt% B 4 C particulates were fabricated by powder metallurgy using hot pressing …
[HTML][HTML] Improved mechanical proprieties of “magnesium based composites” with titanium–aluminum hybrids
In this study, the effect of micron-sized titanium and aluminum addition on the
microstructural, mechanical and work-hardening behavior of pure Mg is investigated. Pure …
microstructural, mechanical and work-hardening behavior of pure Mg is investigated. Pure …
Fabrication of tungsten particles reinforced aluminum matrix composites using multi-pass friction stir processing: Evaluation of microstructural, mechanical and …
G Huang, Y Shen, R Guo, W Guan - Materials Science and Engineering: A, 2016 - Elsevier
In this paper, tungsten particles were dispersed into 1060 Al matrix by multi-pass friction stir
processing (FSP) to fabricate W/1060Al composites. The effects of the number of FSP …
processing (FSP) to fabricate W/1060Al composites. The effects of the number of FSP …
Effect of alumina and silicon carbide hybrid reinforcements on tensile, compressive and microhardness behavior of Mg–3Al–1Zn alloy
Powder metallurgy method was used to synthesize Mg–3Al–1Zn-(1.5 Al 2 O 3–xSiC)
composites, to investigate the influence of Al 2 O 3 and SiC hybrid particles on mechanical …
composites, to investigate the influence of Al 2 O 3 and SiC hybrid particles on mechanical …
镁基复合材料研究进展及新思路
何阳， 袁秋红， 罗岚， 京玉海， 刘勇 - 航空材料学报, 2018 - cqvip.com
镁合金是最轻的金属结构材料, 然而其强度低, 塑性和耐腐蚀性能差, 严重限制了其作为轻金属
材料在工程领域中的广泛应用. 镁基复合材料因具有比强度高, 比刚度高, 比模量高 …
材料在工程领域中的广泛应用. 镁基复合材料因具有比强度高, 比刚度高, 比模量高 …
[HTML][HTML] Effect of environmental aging on mechanical properties of graphene nanoplatelet/nanocarbon aerogel hybrid-reinforced epoxy/carbon fiber composite …
In this study, graphene nanoplatelet (GNP)/nano-carbon aerogel (NCA) hybrids were used
to reinforce epoxy/carbon fiber composite (CFRP) laminates to investigate the environmental …
to reinforce epoxy/carbon fiber composite (CFRP) laminates to investigate the environmental …
High strength and electrical conductivity of copper matrix composites reinforced by carbon nanotube-graphene oxide hybrids with hierarchical structure and nanoscale …
X Wei, J Tao, Y Liu, R Bao, F Li, D Fang, C Li… - Diamond and Related …, 2019 - Elsevier
Cu matrix composites reinforced with carbon nanotube (CNT)-reduced graphene oxide
(RGO) hybrids were prepared by molecular-level mixing (MLM). Hierarchical structure …
(RGO) hybrids were prepared by molecular-level mixing (MLM). Hierarchical structure …
Additive manufacturing of graphene reinforced 316L stainless steel composites with tailored microstructure and mechanical properties
Since its inception, additive manufacturing has facilitated the processing of novel metal
matrix composites that are challenging to fabricate using conventional manufacturing …
matrix composites that are challenging to fabricate using conventional manufacturing …
Synergistic effect of hybrid reduced graphene oxide (rGO) and carbon nanotubes (CNTs) reinforcement on microstructure, mechanical and biological properties of …
Magnesium (Mg) was considered as a new kind of biomaterial implant due to its
biodegradability and biocompatibility. Nevertheless, sufficient mechanical properties and …
biodegradability and biocompatibility. Nevertheless, sufficient mechanical properties and …