An indirect conversion X-ray detector uses a scintillator that utilizes the proportionality of the
intensity of incident radiation to the amount of visible light emitted. A thicker scintillator …

An X-ray transmission imaging based on scintillation detection method is the most widely
used radiation technique particularly in the medical and industrial areas. As the name …

An X-ray imaging detector consisting of a silicon charge coupled device (CCD) and pixel
structured scintillator was developed to improve spatial resolution. The pixelated structure …

The noise reduction algorithms have been widely used in the field of medical X-ray imaging
system using semiconductor photon counting detector (PCD). Among these algorithms, fast …

The resulting image obtained from an X-ray imaging system depends significantly on the
characteristics of the detector. In particular, when an X-ray image is acquired by thinning the …

We developed a multichannel all-in-one phantom dosimeter system composed of nine
sensing probes, a chest phantom, an image intensifier, and a complementary metal-oxide …

We have investigated scintillator efficiency for MeV radiographic imaging. This paper
discusses the modeled detection efficiency and measured brightness of a number of …

Purpose: It is important to understand signal and noise transfer in the indirect, flat‐panel x‐
ray detector when developing and optimizing imaging systems. For optimization where …

The effect of collimator slit width on patient absorbed dose and image quality is evaluated in
the SLOT-SCAN imaging system. For this purpose, GATE Monte-Carlo code was used for …

Although the technological advances in hardware of gamma camera lead to an obvious
increase of detector performance, the final reconstructed image is still strongly restricted by …