This work evaluates the thermal reactivity and the biological reactivity of an amorphous
calcium phosphate thin film produced by radio frequency (RF) magnetron sputtering onto …

In the present work, we investigated the nanostructure of calcium phosphate films formed
during the initial stages of deposition (between 30 and 240 s; deposition rate of 3.7 nm/min) …

The effect of different annealing temperatures on the characteristics of thin calcium
phosphate coatings fabricated by radiofrequency magnetron sputtering was studied …

Calcium phosphate (CaP) compounds like hydroxyapatite and tricalcium phosphates are
considered to be very important biomaterials. This study used RF-magnetron sputtering (RF …

In this study, radiofrequency sputtered calcium phosphate (CaP) coatings were evaluated
after 1h post-deposition heat treatment at either 350° C, 400° C, 450° C, 500° C or 600° C in …

Calcium phosphate (Casingle bond P) coatings were electrochemically deposited on
titanium substrates. By increasing the electrodeposition time (from 1 to 30 min), the coating …

Calcium phosphate films were fabricated on titanium substrates heated up to 773 K using
radiofrequency (RF) magnetron sputtering. The deposition rate, phase and preferred …

The initial behaviour and ultimately the long-term performance of calcium phosphate (Ca–P)
coatings for hard tissue implant applications are influenced by their dissolution properties …

Calcium phosphate (CaP) coatings are commonly employed to improve the bioactivity of
bone and dental metal implants, due to the chemical–physical similarity with the mineral …

Since titanium and its alloys can be directly connected to living remodeling bones at the light
microscopic level, ie, osseointegration, 1, 2) they have been widely used in dental and …