The effect of adding transition-metal catalysts to the surfaces of Solid-Oxide-Fuel-Cell
(SOFC) cathodes was examined. Monolayer amounts of Pd, Ni, and Co were deposited by …

The influence of electrode modification by Atomic Layer Deposition (ALD) of ceria (CeO x)
and strontium oxide (SrO) on the performance of solid oxide fuel cell (SOFC) cathodes was …

To develop next generation solid oxide fuel cells operated at reduced temperatures with a
wide variety of hydrocarbon fuels, surface modification of electrodes is an effective approach …

In order to apply La (Sr) CoO3 (LSC) as a cathode for medium-temperature solid oxide fuel
cells without causing unfavorable solid-state reactions between LSC and yttria-stabilized …

The search for a sustainable supply of clean and economical energy has stimulated great
interest in fuel cells for direct conversion of chemical fuels to electricity. Among all types of …

The development of active cathodes is one of the most critical challenges to lowering the
operating temperature for solid oxide fuel cells (SOFCs). Here we demonstrated that by …

The effect of catalyst nanostructure on the performance of solid oxide fuel cell (SOFC)
anodes prepared by infiltration of an electronic conductor (45 wt% La 0.8 Sr 0.2 Cr 0.5 Mn …

Abstract Composite, Solid-Oxide-Fuel-Cell (SOFC) electrodes of La 0.8 Sr 0.2 FeO 3 (LSF)
and yttria-stabilized zirconia (YSZ) were prepared by infiltration methods and then modified …

A solid oxide fuel cell (SOFC) unit is constructed with Ni‐Ce0. 9Gd0. 1O2–δ (GDC) as the
anode, yttria‐stabilised zirconia (YSZ) as the electrolyte and Pt, Ag or Cu‐added La0. 58Sr0 …

In this work, anode-supported solid oxide fuel cells (SOFC) were tested with a yttria-
stabilized zirconia (YSZ)(8 mol% Y 2 O 3-ZrO 2)/gadolinium-doped ceria (GDC)(Ce 0.9 Gd …