Influence of TiCN coated carbide inserts in turning AA5052+ MoS2+ Si3N4 HMMC for minimizing tool wear and comparing the results with uncoated carbide inserts …

NN Babu, N Senthilkumar - AIP Conference Proceedings, 2024 - pubs.aip.org
The objective of this research work is to minimize tool wear during turning the novel
AA5052+ 3% MoS2+ 9% Si3N4 Hybrid Aluminium Metal Matrix Composite (HAMMC) using …
相关文章 所有 3 个版本

Influence of TiN coated carbide inserts in turning AA5052+ MoS2+ Si3N4 HMMC for minimizing surface roughness and comparing the results with uncoated carbide …

NN Babu, N Senthilkumar - AIP Conference Proceedings, 2024 - pubs.aip.org
The goal of this study is to compare the performance of coated and uncoated inserts while
minimising surface roughness when turning the innovative AA5052+ 3% MoS2+ 9% Si3N4 …
相关文章 所有 3 个版本

Influence of tialn coated carbide inserts in turning AA5052+ 3% MoS2+ 9% Si3N4 HMMC for maximizing material removal and comparing the results with uncoated …

NN Babu, N Senthilkumar - AIP Conference Proceedings, 2024 - pubs.aip.org
The goal of this research is to maximise material removal rate (MRR) when turning the
innovative AA5052+ 3% MoS2+ 9% Si3N4 hybrid aluminium metal matrix composite …
相关文章 所有 3 个版本
[PDF] psu.edu

[PDF][PDF] Tool wear, surface integrity and dimensional accuracy in turning Al2124SiCp (45% wt) metal matrix composite using CBN and PCD tools

MJ Njuguna, D Gao, Z Hao - Res J Appl Sci Eng Technol, 2013 - Citeseer
The focus of this study is the turning of Al2124SiCp (45% wt) Metal Matrix Composite using
PCD, CBN-coated and CBN-uncoated tools. The machinability of Al2124SiCp (45% wt) …
被引用次数：9 相关文章 所有 3 个版本
[PDF] sciencedirect.com

Experimental investigations to study tool wear during turning of alumina reinforced aluminium composite

P Bansal, L Upadhyay - Procedia Engineering, 2013 - Elsevier
Metal matrix compositions (MMC) have become a leading materials and particles reinforced
aluminum MMCs have received considerable attention due to their excellent mechanical …
被引用次数：62 相关文章 所有 7 个版本
[PDF] academia.edu

[PDF][PDF] Machining performance of 7075 Al alloy SiC metal matrix composite with HSS and carbide tool

RK Bhushan, S Kumar, S Das - Journal of Manufacturing Technology …, 2013 - academia.edu
Metal matrix composites (MMC) have received considerable attention due to their excellent
engineering properties. These materials are difficult to machine because of hardness and …
被引用次数：13 相关文章 所有 5 个版本
[PDF] psu.edu

Tool wear and surface roughness when machining AlSi/AlN metal matrix composite using uncoated carbide cutting tool

MS Said, JA Ghani, CH Che Haron, S Yusoff… - Materials Science …, 2014 - Trans Tech Publ
Aluminium silicon alloy (AlSic) matrix composite reinforced with aluminium nitride (AlN)
particle is a new generation material for automotive and aerospace application. This …
被引用次数：8 相关文章 所有 2 个版本

Experimental study on performance of cbn-coated, cBN-uncoated and PCD tools in turning Al 2124 SiC (45% wt) PMMC

MJ Njuguna, D Gao - Key Engineering Materials, 2013 - Trans Tech Publ
The machining of PMMCs is very difficult due to the highly abrasive and intermittent nature of
the reinforcement. It is therefore necessary to choose tool material wisely. The focus of this …
被引用次数：1 相关文章 所有 2 个版本

Surface roughness and tool wear analysis while turning Al/SiCp metal matrix composites

MR Jadhav, DS Patil, PV Mulik, SP Patil… - Manufacturing …, 2020 - mtt.cmti.res.in
Al/SiCp is special types of metal matrixes composite which shows excellent mechanical
properties and have wide range of application. This paper represents optimum process …
被引用次数：1 相关文章 所有 2 个版本
[PDF] academia.edu

[PDF][PDF] Comparing and optimizing the process parameters of two types of al-mmc's in turning

SN Ahamed, PG Scholar - … of engineering and technology (irjet) e …, 2016 - academia.edu
Aluminium Metal Matrix Composites Al MMC's are the nearby elements which can replace
conventional materials which are in use. Al MMC's, now gained the space in applications …
被引用次数：2 相关文章