Cellulose nanocrystals (CNCs) were isolated from waste cotton cloth fibers using a mixed
acid hydrolysis method and subsequently used as fillers to reinforce a polylactic acid (PLA) …

Abstract Poly (lactic acid)(PLA) composites reinforced with cellulose nanocrystals (CNCs)
are promising biodegradable materials. However, the poor compatibility and dispersion of …

The focus of this study is to examine the effect of cellulose nanocrystals (CNC) on the
properties of polylactic acid (PLA) films. The films are fabricated via melt compounding and …

Polylactic acid (PLA) is one of the most promising biodegradable and recyclable
thermoplastic biopolymer derived from renewable feedstock. Nanocellulose reinforced PLA …

In this work, polylactic acid (PLA) matrix was reinforced with bacterial cellulose nanocrystals
(BCNC) to form bio-composite films. The films were produced via two step processes;(1) …

Bio-nanocomposite films based on polylactic acid (PLA) matrix reinforced with cellulose
nanocrystals (CNCs) were developed using a twin-screw extruder. The CNCs were …

Previous attempts to use polylactide (PLA) latex particles and nanofibrillated cellulose (NFC)
in papermaking processing have been limited to low NFC content. In the present study, a …

In this paper, the influence of nanocellulose with different aspect ratio on the performance of
PLLA/PDLA was explicit through a quantity of test results. Three different aspect ratio …

The difficulty of dispersing cellulose nanocrystals (CNCs) in poly (lactic acid)(PLA) was still a
primary obstacle to enhance the properties of PLA nanocomposites. In this work, two …

Cellulose nanocrystals (CNCs) using different polymorphs of cellulose were fabricated from
raw bamboo pulp through alkali treatment followed by acid hydrolysis. The effect of CNC …