Abstract Si/Bi 0.4 Sb 1.6 Te 3 bulk composites have been prepared by combining
mechanical alloying with spark plasma sintering, and their thermoelectric properties have …

This study reports semi-metal/semi-conductor composites with enhanced thermoelectric
performance that results from interface effects between Sb clusters and the Bi 0.5 Sb 1.5 Te …

The p-type (Bi0. 2Sb0. 8) 2Te3 powders were mechanically alloyed and hot pressed at 500°
C for 30 minutes with dispersion of Si nanopowders up to 3 vol%. The thermal conductivity of …

Abstract n-type Bi 2 (Te 0.90 Se 0.10) 3/(SiC) y (0≤ y≤ 0.01) composites with nano-SiC
were fabricated by mechanical alloying combined with microwave sintering. The …

Abstract The (Bi 0.2 Sb 0.8) 2 Te 3 nanocomposites with SbTe nanowire dispersion were
processed by hot pressing at 550° C and their thermoelectric characteristics were evaluated …

Abstract Bulk Bi 0.4 Sb 1.6 Te 3 materials with ZnO nanoinclusions have been fabricated by
mechanical alloying and plasma-activated sintering. The effects of ZnO addition on the …

We investigated the particle size-dependent thermoelectric properties of conventional p-type
Bi 0.5 Sb 1.5 Te 3 compounds (L-large, M-medium, S-small sizes) and M-Bi 0.5 Sb 1.5 Te …

A novel and simple approach was used to disperse Cu nanoparticles uniformly in the Bi 0.5
Sb 1.5 Te 3 matrix, and the thermoelectric properties were evaluated for the Cu-dispersed Bi …

Abstract Bi 0.4 Sb 1.6 Te 3 (BST) based composites incorporated with CuInTe 2 particles
have been prepared and their thermoelectric properties were studied in the temperature …

Nanocomposite thermoelectrics based on Bi 0.45 Sb 1.55 Te 2.985 solid solution of p-type
conductivity are fabricated by the hot pressing of nanopowders of this solid solution with the …