Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic …
PG Su, TT Pan - Materials Chemistry and Physics, 2011 - Elsevier
Polyol process was combined with metal organic decomposition (MOD) method to fabricate
a room-temperature NO2 gas sensor based on a tungsten oxide (WO3) film and another a …
a room-temperature NO2 gas sensor based on a tungsten oxide (WO3) film and another a …
Novel architecture of carbon nanotube decorated poly (methyl methacrylate) microbead vapour sensors assembled by spray layer by layer
For the first time vapour sensors were made by assembling multi-wall carbon nanotube
(CNT) decorated poly (methyl methacrylate) microbeads (PMMAµB) by spray layer by layer …
(CNT) decorated poly (methyl methacrylate) microbeads (PMMAµB) by spray layer by layer …
Binary [Cu 2 O/MWCNT] and ternary [Cu 2 O/ZnO/MWCNT] nanocomposites: formation, characterization and catalytic performance in partial ethanol oxidation
J Khanderi, C Contiu, J Engstler, RC Hoffmann… - Nanoscale, 2011 - pubs.rsc.org
Cuprous oxide agglomerates composed of 4–10 nm Cu2O nanoparticles were deposited on
multiwalled carbon nanotubes (MWCNTs) and on ZnO/MWCNTs to give binary …
multiwalled carbon nanotubes (MWCNTs) and on ZnO/MWCNTs to give binary …
Electrochromic performance of hybrid tungsten oxide films with multiwalled-CNT additions
CK Lin, SC Tseng, CH Cheng, CY Chen, CC Chen - Thin Solid Films, 2011 - Elsevier
In this study, tungsten oxide films were prepared by sol–gel technique. Various amounts of
multiwalled carbon nanotubes (MWCNTs) were added during sol–gel process to obtain …
multiwalled carbon nanotubes (MWCNTs) were added during sol–gel process to obtain …
N-doped carbon nanotubes synthesized in high yield and decorated with CeO2 and SnO2 nanoparticles
R Zhang, L Li, L Chen, G Zhang, K Shi - Journal of alloys and compounds, 2011 - Elsevier
Nitrogen doped multiwalled carbon nanotubes (CNxNTs) with high yield and purity have
been successfully prepared from n-propylamine precursor with CoxMg1− xMoO4 catalyst …
been successfully prepared from n-propylamine precursor with CoxMg1− xMoO4 catalyst …
Ammonia sensors based on composites of carbon nanotubes and titanium dioxide
Design of composite materials for ammonia (NH3) sensing is important because of two main
reasons:(1) NH3 is the most common substitute for chlorofluorocarbons (CFCs) in cooling …
reasons:(1) NH3 is the most common substitute for chlorofluorocarbons (CFCs) in cooling …
Development of an ozone high sensitive sensor working at ambient temperature
F Berger, B Ghaddab, JB Sanchez… - Journal of Physics …, 2011 - iopscience.iop.org
Abstract Hybrid SnO 2/SWNTs thin layer were deposited by using sol-gel process. Such
sensitive layers showed very high performances for O 3 flow detection at ambient …
sensitive layers showed very high performances for O 3 flow detection at ambient …
SnO_2/C 复合材料的制备及NO_x 气敏研究
江超， 李丽， 张国， 广新颖， 史克英 - 材料科学与工艺, 2011 - cqvip.com
为制备在室温条件下对NOx 的检测具有低检测线, 响应迅速, 灵敏度高的材料,
通过高压静电纺丝法制备了多孔SnO2/C 复合材料, 采用TEM, SEM, XRD …
通过高压静电纺丝法制备了多孔SnO2/C 复合材料, 采用TEM, SEM, XRD …
Malodor detection based on electronic nose
T Kerdcharoen, C Wongchoosuk… - Air Quality Monitoring …, 2011 - books.google.com
Recent decades have observed significantly increasing interest in the applications of
electronic nose (E-nose) for qualitative analysis of odors. The first E-nose experiments were …
electronic nose (E-nose) for qualitative analysis of odors. The first E-nose experiments were …
Impedance response of carbon nanotube–titania electrodes dried under modified gravity
The synthesis and impregnation of porous titania films by commercial multiwalled carbon
nanotubes and nanotube rich carbon soot are reported. The samples were dried under …
nanotubes and nanotube rich carbon soot are reported. The samples were dried under …