This article reviews the current state of knowledge concerning the use of powder-based
three-dimensional printing (3DP) for the synthesis of bone tissue engineering scaffolds. 3DP …

In tissue engineering applications or even in 3D cell cultures, the biological cross talk
between cells and the scaffold is controlled by the material properties and scaffold …

Polymeric nanofibers can be produced using methods such as electrospinning, phase
separation, and self-assembly, and the fiber composition, diameter, alignment, degradation …

An effective method for the 3D porous scaffold design of human tissue is presented based
on a hybrid method of distance field and triply periodic minimal surface (TPMS). By the …

Translation of scaffold-based bone tissue engineering (BTE) therapies to clinical use
remains, bluntly, a failure. This dearth of translated tissue engineering therapies (including …

Biomaterials for scaffolds and scaffold fabrication techniques are two key elements in
scaffold-based tissue engineering. Nanocomposites that consist of biodegradable polymers …

Biomaterials science and tissue engineering involve the study and design of materials
capable of eliciting a desired and controllable response from cells and biological …

Afacile procedure for fabrication of a poly (urethane urea)-based porous scaffold with proper
porosity, pore size and mechanical strength for bone tissue engineering is reported in this …

组织工程支架为细胞的增殖提供三维空间和新陈代谢的环境, 并决定新生组织器官的形状与大小
, 其成形技术一直是组织工程的研究热点. 组织工程支架的制备从技术方法角度来看 …

For successful blood vessel and organ manufacturing, it is critical to maintain the cell
survival rate in an environment suitable for the appropriate inducement of regeneration …