The effect of austenite deformation on ferrite transformation and bainite transformation is
reviewed in this paper. In the ferrite zone on continuous cooling transformation (CCT) …

The deformation behavior of a dual phase twinning induced plasticity (TWIP) steel has been
studied by means of continuous heating compression (CHC) testing technique. This has …

Dynamic strain-induced transformation of the low carbon steel Q235 at 770° C and 850° C
leads to fine ferrite grains. The microstructure characterization and mechanism of the fine …

During processing of low carbon high strength linepipe steels, complex microstructures are
usually obtained. Toughness of the steels is found to be strongly dependent on the complex …

Hot torsion testing was performed on a low carbon Nb-Ti microalloyed steel to study the
effects of hot torsion parameters, strain and strain rate, on ultrafine ferrite grains production …

A physically-based model for discontinuous dynamic recrystallization (DDRX) in metals is
developed using a mean field approach. It couples together polyphase plasticity, grain …

Based on the warm tension test and metallurgical microstructure observations, the change of
the microstructure of B340/590DP dual-phase steel, especially the change of grain size in …

Neustálé zvyšování nároků na užitné vlastnosti ocelí a současná tendence snižování
výrobních nákladů vyžaduje soustavnou vědecko-výzkumnou činnost, která se zabývá …