The limited slip systems of magnesium (Mg) and its alloys hamper their widespread
applications in key areas. Rational design of such lightweight alloys requires fundamental …

The dominant active slip systems during plastic deformation of an extruded Mg-4.5 Zn (wt.%)
alloy with and without β 1′ precipitates were investigated by means of advanced electron …

This study investigated the effects of solution heat treatment and multi-directional forging
(MDF) on the microstructure, mechanical, and corrosion properties of an Mg–2Zn–0.2 Ag …

This study investigates the influence of varying rolling reduction on the evolution of
microstructure and mechanical properties of Mgsingle bond10Gd (in wt%) alloys by caliber …

In this work, the influence of Mn and Ca doping on the microstructure and mechanical
properties of Mg-3Zn, Mg-3Zn-0.5 Mn, and Mg-3Zn-0.5 Mn-1.2 Ca alloys is systematically …

Transient liquid phase (TLP) bonding is a promising process for the joining and repairing of
nickel-base superalloys. One of the most important parameters in TLP bonding is the …

Abstract Mg-Gd-Y-Zr alloy, as a typical magnesium rare-earth (Mg-RE) alloy, is gaining
popularity in the advanced equipment manufacturing fields owing to its noticeable age …

Inhomogeneous plastic deformation and recrystallization behavior of Mg-Gd-Y-Zn-Zr alloy
containing only intragranular lamellar long-period stacking ordered (LPSO) phase were …

Age strengthening is a common method to achieve superior mechanical properties
employed in magnesium (Mg) alloys. However, the experimental approaches to examine the …

A novel magnesium-based multi-principal element alloy with the chemical formula Mg 54 Al
22 Li 11 Zn 11 Ti 2 was prepared using the vacuum induction melting method and …