Thermomechanical fatigue tests were performed on austenitic stainless steel in the
temperature range of 250–400° C. Results show that the increase in strain amplitude …

Understanding of crack growth behaviour is necessary to predict accurate fatigue lives. Out-
of-phase thermomechanical fatigue crack propagation tests were performed on FB2 steel …

The present paper computationally investigated and characterized thermo-mechanical crack-
tip fields under elastoplastic fatigue crack growth. The ΔJ-integral is generally path …

Exploring crack growth behaviour is needed to establish accurate fatigue life predictions.
Cracked specimens were tested under strain-controlled out-of-phase thermomechanical …

Thermomechanical fatigue (TMF) loading is inevitable during the operation of ultra-
supercritical power plants. In the present work, TMF tests are carried out at strain rates of 5× …

To understand the effect of mean stress and microstructure on the fatigue crack growth
(FCG) behavior of 9% Cr martensitic steel under high temperatures, the FCG experiments …

The growth of short cracks in round bar specimens with a circumferential notch has been
investigated by an extensive experimental study. This specific specimen geometry has been …

The crack growth behaviour of the alloy CM 247 LC is investigated for out-of-phase TMF and
isothermal tests at the same temperature as the minimum temperature in the TMF tests. The …

The influence of hold time on the crack growth behaviour of a single crystal nickel base
superalloy under in-phase thermomechanical fatigue is investigated. Two da/dt models were …

Thermo-mechanical fatigue (TMF) tests were performed for vertically and horizontally
selective laser melting (SLM) additive manufactured nickel-based superalloy, and also …