Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses
has been thoroughly updated and remains essential reading on the subject. It incorporates …

The thermal stability and crystallization mechanism of the Zr 59.3 Cu 28.8 Al 10.4 Nb 1.5
(at%) metallic glass produced through selective laser melting SLM (from industrial grade …

Additive manufacturing of bulk metallic glasses (BMGs) through laser powder bed fusion
(LPBF) has drawn growing interest in the last years, especially concerning industry-relevant …

The crystallization behaviour during low temperature annealing of samples of the Zr 59.3 Cu
28.8 Al 10.4 Nb 1.5 (at%) bulk metallic glass produced by suction casting and the laser …

As recently demonstrated, amorphous metal foams are highly ductile in compression, and
thus offer attractive compromises in mechanical and physical properties between crystalline …

An amorphous metal foam with a bulk density of 3.4 g/cm 3 is created by low-pressure melt
infiltration of the bulk metallic glass-forming alloy Zr 57 Nb 5 Cu 15.4 Ni 12.6 Al 10 into a bed …

A design of experiments (DoE) approach was employed to systematically characterize the
effects of both oxygen concentration and cooling rate on the amorphous and crystalline …

A design of experiments was used to investigate the effects of oxygen concentrations and
cooling rates during solidification of Vitreloy 105. The cooling rates of different copper molds …

The crystallization behavior of Cu–Zr–Al alloys with different contents of oxygen and yttrium
was studied. Three compositions were chosen based on the good glass former Cu–45Zr …

The non-isothermal and isothermal crystallization behaviors are systematically investigated
for the gas-atomized and as-milled amorphous alloy powders. The results show that the …