The plastic deformation of biodegradable zinc alloy with 1 wt% of magnesium by hydrostatic
extrusion (HE) was performed. The influence of severe plastic deformation on the …

Actual polymeric wound closure devices are not optimal for load-bearing applications due to
the low mechanical properties and the risk of inflammation and bacterial infection mainly …

The microstructure and properties of cast and hot extruded zinc subjected to plastic
deformation by conventional extrusion and by extrusion with a forward-backward rotating die …

Evolution of microstructure and texture of commercial purity (CP) titanium grade 2 during two-
step deformation process was investigated in this work. Deformation technique utilized in …

The KOBO extrusion process is an unconventional method of extrusion based on the
phenomenon of superplasticity as an effect of a special state caused by the oscillatory …

Analysis of the results of the microstructure and the mechanical properties change in
AA1050 aluminum alloy of technical purity processed using ECAP (Equal Channel Angular …

The KoBo device is a press with a cyclically rotating die enabling extrusion of ingots with the
permanent destabilization of their substructure. The method involves a cyclic change of …

Pure aluminium (6N) and commercially pure aluminium (99.7) was deformed by KOBO
method. Microstructure and texture of both materials after deformation was analyzed by …

Observations of refined microstructure of Commercial Purity titanium for applications in
biomedical devices has been carried out. Refinement of titanium microstructure has been …

The principal KoBo device is a press with a forward-backward rotating die, enabling the
extrusion of ingots under conditions of constant destabilization of their substructure …