In this study, a novel Al-Si alloy eutectic Si modifier was proposed and prepared. The
microstructure, metamorphism mechanism and mechanical properties of the eutectic Si of …

This datasheet provides information on key alloy metallurgy, mill product specifications,
processing effects on physical and mechanical properties, and applications of high-strength …

Abstract Effect of Sc addition and T6 aging treatment on the secondary dendritic arm spacing
(SDAS), modification of eutectic Si morphology, β-Al 5 FeSiand π-Al 8 Mg 3 Si 6 Fe 1 phases …

The 2195 alloys prepared by traditional casting and spray forming technology were
investigated by using X-ray diffraction, X-ray microscopy, electron probe microanalyser …

The effect of casting method and alloy modification on secondary dendrite arm spacing
(SDAS) and eutectic Si size of Al-Si binary alloy was investigated. For this, the Al-5Si binary …

Abstract Al-17.6 Si-XBi (X= 0.0, 0.5, 1.0, 1.5 and 2.0 wt%) alloys have been synthesized
using gravity casting technique to study the influence of Bi concentration on the …

This paper is about the mechanical properties and shape of the automobile piston in the
engine. Currently downsizing of the engine is attractive field for the research which …

The coarsening of primary silicon phases is one of the main challenges in the preparation
and application of Al-high Si content alloys. In this work, AlSi40 alloys were manufactured by …

A comprehensive study on the formation mechanism of supersonic atmospheric plasma
sprayed hypereutectic Al-25 wt% Si coating was performed by investigating microstructural …

Al− high Si alloys were designed by the addition of Cu or Mg alloying elements to improve
the mechanical properties. It is found that the addition of 1 wt.% Cu or 1 wt.% Mg as …