During the last few years, researchers have sought new ductile iron (DI) applications
focusing on the development of mixed microstructures, such as ferritic-bainitic or ferritic …

The focus of this investigation was to examine the influence of intercritical austempering
process on the microstructure and mechanical properties of low-alloyed austempered …

In this study, the effect of the austempering times on the microstructures and mechanical
properties of dual-matrix structure austempered ductile iron (DMS-ADI) was investigated …

The excellent property combination of ADI has opened new horizons for cast iron to replace
steel castings and forgings in many engineering applications with considerable cost …

Intercritical austenitizing is a key step on the production of dual-phase austempered ductile
iron. Therefore, understanding the formation of austenite at the intercritical range should …

The effect of the austenitization route on the bainitic reaction kinetics of an alloyed (3.2 C–
2.8 Si–1.8 Ni–1.4 Cu–0.4 Mn–0.2 Mo–0.1 Cr) austempered ductile iron was studied. Two …

Ductile iron is widely used due to its low cost and higher ductility than other cast irons. There
has been an increased interest during the last years in improving the strength of these …

The present work describes studies about the influence of processing variables on the
microstructure and properties of dual phase austempered ductile iron (ADI). The upper and …

Abrasive wear behavior of ductile irons with different dual matrix structures has been
investigated. In order to obtain ductile irons with different dual matrix structures an unalloyed …

In the present study the fatigue strength of austempered ductile irons with dual matrix
structures (ADI with DMS) has been studied for an unalloyed ductile cast iron. For this …