High-pressure die casting (HPDC) has been extensively used to manufacture aluminum
alloy heat dissipation components in the fields of vehicles, electronics, and communication …

In this paper, several low alloying conductive Al alloys Al-0.5 Fe-0.2 Si, Al-0.5 Mg-0.35 Si, Al-
0.8 Fe-0.2 Cu were selected as the research objects. According to our study, the …

The design of high-performance overhead aluminum wires is challenging, due to the
intrinsic trade-off of strength-ductility and strength-electrical conductivity (EC). The in-situ …

Abstract Hypoeutectic Al-Si alloys exhibit excellent mechanical properties and relatively
good electrical conductivity (EC), and they are often used as overhead transmission …

Abstract Hypoeutectic Al-Si alloys are one of common material for overhead transmission
lines. However, electrical conductivity and mechanical property are hard to be improved …

High strength and excellent electrical conductivity of Al alloys are highly desired in the field
of power transmission. However, these two factors are usually contradictory in metallic …

The transition metal elements (TMs) are one of the most important factors that damage the
electrical conductivity (EC) of AA6101. But according to our study, during boron treatment …

In this study, continuous casting process performed using AA1070 and AA6101 feedstock
alloys for bare conductor manufacturing. Test samples were provided at breaking time in …

In this paper, the effects of size, morphology and distribution of eutectic silicon on the
thermal conductivity of Al-8Si alloy modified by Sr (0.04, 0.08, 0.12 wt.%) and Sb (0.1, 0.3 …

Generally, Ti in solution damages the electrical conductivity of aluminum, so the less the
better. However, during boron treatment process trace Ti can promote the precipitation of …