As a 0D material, powder particles can be used to create almost any complicated
engineering component by utilizing the high‐performance manufacturing capabilities of …

Abstract The application of Nd-Fe-B magnet with substitution of Nd by cheap and abundant
Ce elements is seriously limited due to the intrinsically inferior magnetic properties of Ce-Fe …

Most microstructure characterization tools are based on the observation of two-dimensional
(2D) sections through a material. The results allow, for microstructures with homogeneous …

Additive manufacturing is a very rapidly developing industrial field. It opens many
possibilities for the fast fabrication of complex-shaped products and devices, including …

Permanent magnets based on neodymium‐iron‐boron (Nd‐Fe‐B) alloys provide the highest
performance and energy density, finding usage in many high‐tech applications. Their …

Additive manufacturing enables intricate designs for electrical machines. However, soft-
magnetic alloys produced through this method often fall short in magnetic performance …

Shape anisotropy, developed as a result of spinodal decomposition (SD) is the basis for the
hysteresis behavior of Alnico magnets. The SD process is sensitive to processing conditions …

Abstract Alnico-8H (14 wt% Ni) and Alnico-8H (19 wt% Ni) were additively fabricated from a
blend of elemental powders with compositions (in wt.%) of 38Co-29Fe-14Ni-8Al-8Ti-3Cu …

With renewed interest in AlNiCo alloys due to the rare-earth crisis, advanced
characterization techniques have been used to gain more structural information for further …

Fine-grained and anisotropic Alnico magnets were prepared by powder bed fusion using a
laser beam. The as-built magnets were treated by solution treatment (ST) at 1250° C …