Sol–gel-based coatings for oxidation protection of TiAl alloys
LK Wu, JJ Wu, WY Wu, FH Cao, MY Jiang - Journal of Materials Science, 2020 - Springer
The low density, high specific strength, and good creep properties make TiAl alloys being
promising high-temperature structural materials in aerospace and automotive industries …
promising high-temperature structural materials in aerospace and automotive industries …
Polymer-derived SiAlOC coating to improve the high-temperature resistance of chromium
Cr and its alloys are interesting materials for applications at temperatures higher than 1000°
C. However, challenges such as limited oxidation resistance and nitridation still restrict their …
C. However, challenges such as limited oxidation resistance and nitridation still restrict their …
[HTML][HTML] Polymer Derived Ceramics based on SiAlOC glasses as novel protective coatings for ferritic steel
In this work, the potential of using Polymer Derived Ceramics based on SiAlOC glasses in
the form of protective thin layers was demonstrated on Ferritic Stainless Steel (FSS) Crofer …
the form of protective thin layers was demonstrated on Ferritic Stainless Steel (FSS) Crofer …
High temperature oxidation behavior of TiAl alloy with electrodeposited SiOC coating
HJ Yan, YY Li, RZ Yin, QQ Sun, HJ Liu, CL Zeng… - Corrosion …, 2023 - Elsevier
SiOC coating was electrodeposited on TiAl alloy to improve the high temperature oxidation
resistance. The mass gain of the compact SiOC coating is 0.06±0.026 mg cm-2, which is one …
resistance. The mass gain of the compact SiOC coating is 0.06±0.026 mg cm-2, which is one …
Investigation of isothermal oxidation performance of TiAl alloys sintered by different processing methods
Y Garip - Intermetallics, 2020 - Elsevier
The production of TiAl alloys can be a discouraging task owing to their low ductility at room
temperature. However, the development of novel methods that are alternative to traditional …
temperature. However, the development of novel methods that are alternative to traditional …
Corrosion behavior of the resistance sintered TiAl based intermetallics induced by two different molten salt mixture
Y Garip, O Ozdemir - Corrosion Science, 2020 - Elsevier
The cyclic hot corrosion behaviors of TiAl based intermetallics were studied in two different
molten salts consisting of% wt. Na 2 SO 4-25NaCl and Na 2 SO 4-25K 2 SO 4 at 800 and …
molten salts consisting of% wt. Na 2 SO 4-25NaCl and Na 2 SO 4-25K 2 SO 4 at 800 and …
High-temperature stability and oxidation behavior of SiOC/HfO2 ceramic nanocomposite in air
Abstract High temperature stability (1100− 1500° C) and oxidation behavior at 1500° C of
the SiOC/HfO 2 ceramic nanocomposite were investigated in air. Consumption of free …
the SiOC/HfO 2 ceramic nanocomposite were investigated in air. Consumption of free …
SiOC films on C/C composite prepared by chemical vapor deposition with hexamethyldisilazane precursor
X Wu, S Yu, Y Li - Ceramics International, 2022 - Elsevier
Silicon oxycarbide (SiOC) films on C/C composite substrate were prepared by isothermal
chemical vapor deposition (CVD) with hexamethyldisilazane (HMDSN) as precursor. The …
chemical vapor deposition (CVD) with hexamethyldisilazane (HMDSN) as precursor. The …
The oxidation resistance of Ni nanoparticle incorporated SiOC coating for TiAl alloy
In this work, SiOC coatings incorporated with Ni nanoparticles were fabricated on γ-TiAl
alloy by dip-coating. The microstructure and high temperature oxidation behavior of the …
alloy by dip-coating. The microstructure and high temperature oxidation behavior of the …
[HTML][HTML] Oxidation behaviour of uncoated and PDC-SiAlOC glass-coated TiAl at 750° C in dry and humid air
In this work polymer derived ceramic (PDC) coatings, based on SiAlOC glasses, were
successfully applied on 48-2-2 TiAl alloy samples. These coatings showed a significant …
successfully applied on 48-2-2 TiAl alloy samples. These coatings showed a significant …