This paper reviews the available literature relating to the emerging research into the
performance of coatings under combined wear and corrosion conditions. Understanding …

The corrosion and impact–abrasion–corrosion behaviors of quenching–tempering Fe–Cr
martensitic steels for ball mill liner were investigated in the corrosive slurry of a copper mine …

Ceramic and metals mixed phases are a category of materials known as cermet to produce
materials that have the best characteristics of both such as high hardness, abrasion wear …

Cr3C2–NiCr and WC–Ni coatings are widely used for wear applications at high and room
temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2–NiCr …

In this paper, the parametric effects, including the sand concentration, slurry flow velocity
and impact angle, on erosion–corrosion (E–C) of X65 steel in oil sands slurry were …

In this work, the optimal coating process (OCP) designed by Taguchi program for high
velocity oxy-fuel (HVOF) thermal spraying WC–CrC–Ni powder on Inconel 718 substrate (IN …

Erosion by solid particles in oil/water slurries is a technologically important area. In such
conditions, it is necessary to distinguish between the effects of the sand, aqueous …

The electrochemical corrosion behavior of X65 pipeline steel in the simulated oil/water
emulsion was investigated under controlled hydrodynamic and electrochemical conditions …

Erosion–corrosion (E–C) of 3003 aluminum (Al) alloy in ethylene glycol–water solutions
were studied by weight-loss and electrochemical measurements as well as surface …

Cermet based coatings are being increasingly used to combat erosion–corrosion in oil
sands pipelines and pumps where the degradation is caused by a slurry mix of sand …