Radiation damage in nanostructured materials
Materials subjected to high dose irradiation by energetic particles often experience severe
damage in the form of drastic increase of defect density, and significant degradation of their …
damage in the form of drastic increase of defect density, and significant degradation of their …
Kink mechanism in Cu/Nb nanolaminates explored by in situ pillar compression
Nano metallic laminates (NMLs) exhibit different failure modes depending on the loading
conditions due to their mechanical anisotropies. Kinking is a typical failure mode in many …
conditions due to their mechanical anisotropies. Kinking is a typical failure mode in many …
Thermal stability of immiscible Cu-Ag/Fe triphase multilayers with triple junctions
Nanostructured metallic multilayers have attracted significant attention due to their high
mechanical strength. However, they often have limited thermal stability at elevated …
mechanical strength. However, they often have limited thermal stability at elevated …
Size dependent strengthening in high strength nanotwinned Al/Ti multilayers
Mechanical behavior of metallic multilayers has been intensively investigated. Here we
report on the study of magnetron-sputtered highly textured Al/Ti multilayer films with various …
report on the study of magnetron-sputtered highly textured Al/Ti multilayer films with various …
Thermal stability and deformability of annealed nanotwinned Al/Ti multilayers
Recent studies showed that nanotwinned Al/Ti multilayers have outstanding mechanical
properties at room temperature. However, the thermal stability of these multilayers remains …
properties at room temperature. However, the thermal stability of these multilayers remains …
[HTML][HTML] Microstructure evolution and mechanical property response of TC11 titanium alloy under electroshock treatment
This work investigated the effects of electroshock treatment (EST) on the microstructure
variation and mechanical properties of TC11 alloy. The average hardness of the specimens …
variation and mechanical properties of TC11 alloy. The average hardness of the specimens …
Progress of zirconium alloying in iron-based alloys and steels
N Liu, X Cao, T Zhao, ZW Zhang - Materials Science and …, 2021 - Taylor & Francis
Zirconium is used as an alloying element owing to its ability to form carbides, nitrides,
oxides, and other intermetallic compounds. Zirconium alloying has the high efficacy in …
oxides, and other intermetallic compounds. Zirconium alloying has the high efficacy in …
Evolution of Microstructure and Hardness of TC11 Titanium Alloy under Different Electroshocking Treatment Directions
The effects of electroshocking treatment (EST) direction on microstructure and hardness of
TC11 alloy (Ti-6.5 Al-3.5 Mo-1.5 Zr-0.3 Si) were investigated. The results indicated that the …
TC11 alloy (Ti-6.5 Al-3.5 Mo-1.5 Zr-0.3 Si) were investigated. The results indicated that the …
Effects of microstructure and morphological distribution on hydrogen-embrittlement sensitivity of Ti–6Al–4V alloy welded joint
X Feng, Y Xu, Y Shi, Y Gu, V Korzhyk - International Journal of Hydrogen …, 2024 - Elsevier
The effects of the organizational characteristics and morphological distribution of Ti–6Al–4V
alloy welded joint on their resistance to hydrogen embrittlement were investigated. The β …
alloy welded joint on their resistance to hydrogen embrittlement were investigated. The β …
Solid solubility extension and nano-mechanical properties of rapidly solidified Fe-Zr eutectic alloys under free fall condition
DD Zuo, J Chang, W Liu, HP Wang - Journal of Alloys and Compounds, 2022 - Elsevier
The liquid-solid phase transitions and solidified microstructures of highly undercooled Fe-Zr
eutectic melts were investigated by the drop tube technique. The quantitative relationships …
eutectic melts were investigated by the drop tube technique. The quantitative relationships …