The Nickel-based superalloy 718 is a precipitation-hardened material, especially by the
ordered and coherent phases γ”(Ni 3 Nb) and γ ″(Ni 3 (Al, Ti)). In addition to these phases …

The relationship between acoustic parameters and the microstructure of a Cu30Zn brass
plate subjected to plastic deformation was evaluated. The plate, previously annealed at 550° …

Rolling is one of the most employed industrial processes which can be used at multiple
manufacturing stages, allowing different geometries such as plates, rods, profiles, billets …

A material with a strong double fibrous texture is subjected to rolling with various
deformation paths—unidirectionally and with 90° rotations about the normal direction (cross …

Texture evolution during tension test was investigated on three face-centered cubic (FCC)
metals, namely, Ni (unary), equiatomic CrFeNi (ternary), and equiatomic CoCrFeMnNi …

The relationship between acoustic parameters and the microstructure of a Cu30Zn brass
plate subjected to plastic deformation was evaluated. The plate, previously annealed at 550 …

The evolution of deformation texture and microstructure in commercially pure Al (cp-Al) and
two Al–Mg alloys (Al–4Mg and Al–6Mg) during cold rolling to a very large strain (true strain …

An anomalous deformation texture evolution has been observed in high-stacking-fault-
energy pure platinum during cold rolling. A maximum of 98% thickness reduction, equivalent …

The development of microstructure, texture and mechanical properties in single as well as
two-phase recrystallized and aged Ni-Cr binary alloys are investigated. For this purpose …

This study deals with the evolution of crystallographic texture during secondary processing
of aluminium-lithium alloy AA2195 sheets and its effect on the single-point incremental …