Fundamentals and advances in magnesium alloy corrosion
There remains growing interest in magnesium (Mg) and its alloys, as they are the lightest
structural metallic materials. Mg alloys have the potential to enable design of lighter …
structural metallic materials. Mg alloys have the potential to enable design of lighter …
Review of the atmospheric corrosion of magnesium alloys
H Liu, F Cao, GL Song, D Zheng, Z Shi… - Journal of Materials …, 2019 - Elsevier
Mg atmospheric corrosion is induced by a thin surface aqueous layer. Controlling factors are
microgalvanic acceleration between different phases, protection by a continuous second …
microgalvanic acceleration between different phases, protection by a continuous second …
Rare earth based magnesium alloys—a review on WE series
Magnesium and magnesium alloys have attracted growing attention over the last decades
as lightweight materials for a wide range of applications. In particular, WE series magnesium …
as lightweight materials for a wide range of applications. In particular, WE series magnesium …
Self-healing ceria-modified coating for corrosion protection of AZ31 magnesium alloy
A hybrid siloxane-based coating was modified with CeO 2 nanoparticles and applied on
AZ31. The corrosion protection performance was evaluated via Electrochemical Impedance …
AZ31. The corrosion protection performance was evaluated via Electrochemical Impedance …
Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg (OH) 2 of as-cast and solution heat-treated binary Mg–X alloys: X= Mn, Sn, Ca, Zn, Al …
Corrosion of binary Mg–X alloys (as-cast and solution heat-treated) was characterised by
immersion tests in 3.5% NaCl solution saturated with Mg (OH) 2, and by salt spray. Alloys …
immersion tests in 3.5% NaCl solution saturated with Mg (OH) 2, and by salt spray. Alloys …
The surface, microstructure and corrosion of magnesium alloy AZ31 sheet
This study investigates the effect of some industrial pre-treatments, including heat-treatment,
surface grinding and polishing, acid cleaning and sandblasting, on the corrosion …
surface grinding and polishing, acid cleaning and sandblasting, on the corrosion …
Analysis of the surface film formed on Mg by exposure to water using a FIB cross-section and STEM–EDS
The composition and structure of the surface film formed on pure Mg exposed at the
corrosion potential in pure water for 48h was investigated using a FIB cross-section and …
corrosion potential in pure water for 48h was investigated using a FIB cross-section and …
The effects of short pulse laser surface cleaning on porosity formation and reduction in laser welding of aluminium alloy for automotive component manufacture
AW AlShaer, L Li, A Mistry - Optics & Laser Technology, 2014 - Elsevier
Laser welding of aluminium alloys typically results in porosity in the fusion zones, leading to
poor mechanical and corrosion performances. Mechanical and chemical cleaning of …
poor mechanical and corrosion performances. Mechanical and chemical cleaning of …
Enhanced corrosion performance of ultrasonically shot peened and graphene nanoparticles reinforced squeeze-cast AZ91 magnesium alloy
The current study examined the influence of ultrasonic shot peening (USP) for 10, 20, and
30 s on the corrosion behavior of AZ91 alloy integrated with graphene nanoplatelets …
30 s on the corrosion behavior of AZ91 alloy integrated with graphene nanoplatelets …
The effect of time dependent native oxide surface conditions on the electrochemical corrosion resistance of Mg and Mg-Al-Ca alloys
M Felten, J Nowak, O Beyss, P Grünewald, C Motz… - Corrosion …, 2023 - Elsevier
The time dependent native oxide surface conditions of Mg and Mg-Al-Ca alloys under
moderate atmospheric conditions were continuously analysed via in situ SKPFM, in situ …
moderate atmospheric conditions were continuously analysed via in situ SKPFM, in situ …