The heterogeneous structure of Al alloys renders them susceptible to localized corrosion
due to the different electrochemical properties existing in the Al-rich solid solution matrix and …

This paper reports on the inhibitive properties of Moringa Oleifera and Psiduim Quajava
Leaves Extract on the Corrosion Susceptibility of Mild Steel in an alkaline environment, in …

Silver additions between 0.03 wt.% to 0.50 wt.% were made to the Zn-20Sn (wt.%) in an
attempt to develop Zinc based alloy for application and improvement in giftware industry. In …

The influence of minority alloying element Zn in range from 1% to 3 at.% on the corrosion
behavior of rapidly solidified (AlCuMg) 100-xZnx ribbons with amorphousness from 71% to …

The inhibitive effect of Ocimum gratissimum by seed extract on the corrosion of zinc-
aluminium (ZA) alloy in 2 M hydrochloric acid (HCl) solution has been studied using …

The high demand for light metals as engineering materials lies in their high strength-to-
weight ratio with good corrosion resistance in diverse environments. Passivation …

The research focused on improving the adhesion strength of low melting temperature lead
free solder to soda lime glass through ultrasonic soldering. This was conducted by analyzing …

This paper presents the predictability of aluminium-manganese alloy exposure time based
on its as-cast weight and corrosion rate in sea water environment. The validity of the derived …

The corrosion characterization of binary Al-Sn alloy systems has been statistically analyzed
in the light of developed model equations. It was observed that the modeled corrosion …

Open system corrosion rate of aluminium-manganese (Al-Mn) alloy in sea water
environment was assessed based on the alloy weight loss and exposure time. A model was …