Recent progress in micro‐/nano‐fibrillar reinforced polymeric composite foams
C Zhao, LH Mark, S Kim, E Chang… - Polymer Engineering …, 2021 - Wiley Online Library
Manufacture of thermoplastic foams with a fine cellular structure (a higher expansion ratio, a
higher cell density, and smaller cell sizes) is challenging work due to the weak viscoelastic …
higher cell density, and smaller cell sizes) is challenging work due to the weak viscoelastic …
High thermal insulation and compressive strength polypropylene foams fabricated by high-pressure foam injection molding and mold opening of nano-fibrillar …
Polypropylene (PP) foams with a thermal conductivity of as low as 36.5 mW m− 1 K− 1 are
fabricated by high-pressure foam injection molding followed by mold-opening with CO 2 as …
fabricated by high-pressure foam injection molding followed by mold-opening with CO 2 as …
[HTML][HTML] In-situ microfibrillated Poly (ε-caprolactone)/Poly (lactic acid) composites with enhanced rheological properties, crystallization kinetics and foaming ability
Y Qiao, Q Li, A Jalali, J Yang, X Wang, N Zhao… - Composites Part B …, 2021 - Elsevier
The present study aims at investigation on the morphology, rheology, isothermal
crystallization and foaming behavior of the fibrillated PCL/PLA composites. The samples …
crystallization and foaming behavior of the fibrillated PCL/PLA composites. The samples …
Lightweight and strong fibrillary PTFE reinforced polypropylene composite foams fabricated by foam injection molding
Polypropylene (PP) shows wide applications in many industries, especially for automotive.
To save resources and energy, lightweight is an essential pursuit for industrial products …
To save resources and energy, lightweight is an essential pursuit for industrial products …
Entirely environment-friendly polylactide composites with outstanding heat resistance and superior mechanical performance fabricated by spunbond technology …
This study aims at investigating the manufacturing and characterization of all-polylactide
composites prepared by melt spunbond spinning technology. To do so, a series of …
composites prepared by melt spunbond spinning technology. To do so, a series of …
Tuning viscoelastic and crystallization properties of polypropylene containing in-situ generated high aspect ratio polyethylene terephthalate fibrils
This study explores how the rheological and crystallization properties of linear
polypropylene (PP) are changed by incorporating fibrillated polyethylene terephthalate …
polypropylene (PP) are changed by incorporating fibrillated polyethylene terephthalate …
[HTML][HTML] Peculiar crystallization and viscoelastic properties of polylactide/polytetrafluoroethylene composites induced by in-situ formed 3D nanofiber network
This study comprehensively investigates the development of in-situ polylactide (PLA)/
polytetrafluoroethylene (PTFE) nanofibrillated composites. PLA based composites …
polytetrafluoroethylene (PTFE) nanofibrillated composites. PLA based composites …
Dispersed polypropylene fibrils improve the foaming ability of a polyethylene matrix
We compare the foaming ability of metallocene catalysed polyethylene (mPE) with that of
mPE containing fibrillated polypropylene (PP) domains (mPE/fibrillated-PP) and mPE …
mPE containing fibrillated polypropylene (PP) domains (mPE/fibrillated-PP) and mPE …
Challenge in manufacturing nanofibril composites with low matrix viscosity: Effects of matrix viscosity and fibril content
Polymer/polymer-nanofibril composite is considered as a new member of the polymer
composite family. With its superior property and easy processability, this type of composite …
composite family. With its superior property and easy processability, this type of composite …
Improvement in processability for injection molding of bisphenol-A polycarbonate by addition of low-density polyethylene
Y Kuroda, KI Suzuki, G Kikuchi, N Moonprasith, T Kida… - Materials, 2023 - mdpi.com
The rheological properties and processability at injection molding were studied for
bisphenol-A polycarbonate (PC) that was modified by low-density polyethylene (LDPE) …
bisphenol-A polycarbonate (PC) that was modified by low-density polyethylene (LDPE) …