[HTML][HTML] Review of the development of copper oxides with titanium dioxide thin-film solar cells
Copper oxide-titanium dioxide (TiO 2) p–n junctions are promising materials for photovoltaic
devices and may reduce production costs due to their low cost and inexpensive production …
devices and may reduce production costs due to their low cost and inexpensive production …
Effect of deposition parameters on spray pyrolysis synthesized CuO nanoparticle thin films for higher supercapacitor performance
In this study, copper oxide (CuO) thin films were synthesized at different deposition
temperatures on fluorine doped tin oxide coated glass (FTO) substrates by spray pyrolysis …
temperatures on fluorine doped tin oxide coated glass (FTO) substrates by spray pyrolysis …
A new efficient synthesis of CuO thin films using modified SILAR method
O Daoudi, A Elmadani, M Lharch… - Optical and Quantum …, 2020 - Springer
Due to its direct band gap and high absorption coefficient, Cupric Oxide (CuO) is widely
used as an absorbent material for solar cells, yet most of the available deposition methods …
used as an absorbent material for solar cells, yet most of the available deposition methods …
Effect of gamma irradiation on structural, morphological, optical and thermal properties of Ca doped CuO nanostructure thin films
Ö Yağci - Radiation Effects and Defects in Solids, 2023 - Taylor & Francis
Semiconductor optoelectronic and photonic devices are used in many harsh environment
applications such as space and nuclear reactor etc. Gamma radiation in such environments …
applications such as space and nuclear reactor etc. Gamma radiation in such environments …
Effect of annealing on copper oxide thin films and its application in solar cells
AN Hussain, KI Hassoon… - Journal of Physics …, 2020 - iopscience.iop.org
Abstract Cupric Oxide (CuO) thin films were prepared by chemical spray pyrolysis (CSP)
method at 400 C on glass and p-type Si substrate and then the films were annealed at 500 C …
method at 400 C on glass and p-type Si substrate and then the films were annealed at 500 C …
ZnO/CuO hybrid films synthesized by sequential application of electrochemical and spin coating technique
G Sığırcık, T Tüken - Journal of Materials Science: Materials in Electronics, 2020 - Springer
Abstract The synthesis of ZnO/CuO films on ITO substrate was realized in two steps, first ZnO
was deposited electrochemically and then CuO nanoparticles were precipitated with help of …
was deposited electrochemically and then CuO nanoparticles were precipitated with help of …
Morphological evolution of bilayer-structured copper oxide from ribbon-like-structured copper acetate hydroxide with varying growth temperatures
KH Kim, Y Kanamaru, Y Abe, M Kawamura, T Kiba - Materials Letters, 2020 - Elsevier
We investigated the optical, morphological, and electrochemical characteristics of
nanostructured samples that were directly prepared on fluorine doped tin oxide (FTO) by a …
nanostructured samples that were directly prepared on fluorine doped tin oxide (FTO) by a …
Nanostructured CuO film grown from solution by preferential microwave heating of the conducting glass substrate
B Gonzalez, I Zumeta, M Díaz-Solís… - Materials Letters, 2020 - Elsevier
Nanostructured Cu (II) oxide receives significant attention because of its possible
applications. Very well adhered CuO films have been grown on conducting glass substrates …
applications. Very well adhered CuO films have been grown on conducting glass substrates …
Analysis of the photocurrent from CuO/TiO2 nanostructured photoelectrodes to elucidate the benefits of nanocrystal size decrease
F Forcade, B González, R Snyders, X Noirfalise… - Applied Physics A, 2022 - Springer
CuO/TiO2 nanostructured photoelectrodes obtained with a modified immersion technique
are analyzed, and their photocurrents are compared in order to study the effect of …
are analyzed, and their photocurrents are compared in order to study the effect of …
Double doping synergy to improve structural, morphological, optical, and electrical properties of solution-based Cd and M (M: Pb, Sn, Bi) double doped …
In this study, nanostructured CuO, Cd 0.01 Cu 0.99 O and Cu 0.98 Cd 0.01 M 0.01 O (M: Pb,
Bi, Sn) films were synthesized using the successive ionic layer adsorption and reaction …
Bi, Sn) films were synthesized using the successive ionic layer adsorption and reaction …