Dual face-centered cubic (FCC) CoCrCu 1.2 FeNi semi-solid billets were prepared by
semisolid isothermal treatment of wrought high entropy alloy (HEA)(SSITWH) method, and …

Accumulative plastic deforming (APD) at multistep temperatures was induced into the
recrystallization and partial melting (RAP) route as a novel predeformation method to …

Thixoextrusion involves processing alloys with a spheroidal microstructure in the semi-solid
state. Before thixoextrusion, repetitive upsetting-extrusion (RUE) is introduced into the strain …

The semi-solid billets of the AZ80-0.2 Y-0.15 Ca magnesium alloy (AZ80M) were fabricated
through the strain-induced melt activation (SIMA) process by hot extrusion and then partial …

Cross wedge rolling is introduced into the strain induced melt activation process before cold
compression to prepare semisolid A356. 2 alloy. The microstructural evolution of semisolid …

Creep properties of AZ91 magnesium alloy and AZRC91 (AZ91+ 1 wt pct RE+ 1.2 wt pct Ca)
alloy were investigated using the impression creep method. It was shown that the creep …

Semi-solid metal processing is the well-known technique used for the production of Al-
based alloys components with sound quality and improved properties. To produce and …

The effects of calcium and rare earth elements (RE) on the microstructure and creep
properties of as-cast and thixoformed AZ91 magnesium alloy have been investigated. It has …

The first reported microstructural study of Mg-RE alloy matrix composites in the semi-solid
state was presented. Mg–Nd–Zn (ZM6) alloy matrix composites reinforced with SiC particles …

This paper investigated the coarsening kinetics of needle-shaped γ precipitates in CoNiCrAl
alloys after isothermal heat treatments at 900° C and 1100° C. The CoNiCrAl alloys were …