Thermal stability, determining the material ability of retaining its properties at required
temperatures over extended service time, is becoming the next frontier for aluminum alloys …

The use of recycled aluminum alloys can greatly reduce energy consumption and carbon
emissions, but the high iron content limits the scope of application of recycled aluminum …

An air-cooled stirring rod (ACSR) process for efficiently preparing large volumes of semisolid
slurry was introduced. A new low-cost casting Al–Si–Fe–Mg–Sr alloy was used to prepare …

Ageing characteristics and high temperature tensile properties of the Al–7Si–1Cu–0.5 Mg
(wt%) alloy modified with transition metals Cr, Ti, V and Zr, were tested. The modified alloy …

Abstract The Al-Si-Fe-Mg-Cu-Zn alloy was used to manufacture large, thin-walled parts for 5
G base stations by using the ultrasonic vibration-assisted air-cooled stirring rod rheological …

Abstract θ-Al 13 Fe 4 is one of the common Fe-containing intermetallic compounds (FIMCs)
that forms during solidification in Al alloys. Silicon (Si) as impurity or solute in Al alloys is …

In the present work, the effect of yttrium (Y) addition (0, 0.15, 0.3, 0.5 and 0.7 wt%) on the
microstructure and tensile properties of recycled A356 cast alloys containing 1.0 wt% Fe has …

The microstructures, mechanical properties, thermal conductivities, and corrosion behavior
of novel high-thermal-conductivity hypoeutectic Al-Si alloys, prepared by rheological high …

The phase selection among different types of Fe-containing intermetallic compounds
(FIMCs) during solidification process cannot be controlled. Thus, resultant microstructures …

Improvement of corrosion resistance in high-strength Al–Si–Cu–Mg casting alloy is an
important issue for its application in humid and corrosion environment. In this paper, the …