Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding

CW Tan, ZG Jiang, LQ Li, YB Chen, XY Chen - Materials & Design, 2013 - Elsevier
Abstract 5A02 aluminum alloy and pure copper were joined by friction stir welding (FSW). A
defect-free joint was obtained when one of process parameters, ie the traverse speed was …

Latest developments in modeling and characterization of joining metal based hybrid materials

S Khoddam, L Tian, T Sapanathan… - Advanced …, 2018 - Wiley Online Library
Advanced materials consist of several materials systems that exhibit complementary
properties for multi‐purpose applications. Joining of dissimilar materials is a critical and …

Rolling deformation behaviour and interface evaluation of Cu-Al bimetallic composite plates fabricated by horizontal continuous composite casting

J Wang, F Zhao, G Xie, Y Hou, R Wang, X Liu - Journal of Materials …, 2021 - Elsevier
Cu-Al bimetallic composite plates with a thickness of 2 mm were prepared by a horizontal
continuous composite casting-rolling process. The effects of rolling parameters on the …

[HTML][HTML] Microstructural characterisation and mechanical properties of dissimilar AA5083-copper joints produced by friction stir welding

G Karrar, A Galloway, A Toumpis, H Li… - Journal of Materials …, 2020 - Elsevier
This work aims to study the influence of the tool rotational speed and tool traverse speed on
dissimilar friction stir butt welds on 3 mm thick AA5083 to commercially pure copper plates …

Evaluation of microstructures and mechanical properties of dissimilar materials by friction welding

CH Muralimohan, S Haribabu, YH Reddy… - Procedia Materials …, 2014 - Elsevier
The joining dissimilar metals demanding increasing importance in many industrial
applications to utilize hybrid structures and reduce the cost and weight of components. The …

An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer

J Zhang, G Luo, Y Wang, Q Shen, L Zhang - Materials Letters, 2012 - Elsevier
Diffusion bonding aluminum and magnesium using a Ni interlayer was investigated for the
first time. The bonding trials were carried out at 440° C for different time under 1MPa in a …

Influence of laser offset on laser welding-brazing of Al/brass dissimilar alloys

L Zhou, ZY Li, XG Song, CW Tan, ZZ He… - Journal of Alloys and …, 2017 - Elsevier
Laser welding-brazing of dissimilar metals 5052 aluminum alloy and H62 brass in butt
configuration was performed with Zn-15% Al filler metal. Laser beam offset was defined as …

Microstructural characterization and mechanical properties of aluminum 6061-T6 plates welded with copper insert plate (Al/Cu/Al) using friction stir welding

VM Khojastehnezhad, HH Pourasl - … of Nonferrous Metals Society of China, 2018 - Elsevier
Friction stir welding was used to join two aluminum 6061-T6 plates with an insert of a pure
copper plate (Al/Cu/Al), and then the influence of the copper insert on the joint performance …

[HTML][HTML] Diffusion bonding of copper alloy and nickel-based superalloy via hot isostatic pressing

Y Xiao, L Lang, W Xu, D Zhang - Journal of Materials Research and …, 2022 - Elsevier
Joining copper alloys to nickel-based superalloys can achieve a combination of their
advantages. However, joining these two dissimilar alloys is challenging due to their …

Changes in microstructure and mechanical properties of steel-copper wire during deformation

IE Volokitina, AV Volokitin - Metallurgist, 2023 - Springer
Currently, there are few works devoted to the change in the microstructure of steel-copper
bimetallic wire during its deformation. Since steel and copper have different mechanical …