CFD analysis and optimum design for a centrifugal pump using an effectively artificial intelligent algorithm

CN Wang, FC Yang, VTT Nguyen, NTM Vo - Micromachines, 2022 - mdpi.com
In this study, we proposed a novel approach to improve centrifugal pump performance with
regard to the pump head, pump efficiency, and power. Firstly, to establish constraints, an …

Erosion and flow visualization in centrifugal slurry pumps: a comprehensive review of recent developments and future outlook

J Banka, AK Rai - Particulate Science and Technology, 2024 - Taylor & Francis
Primary goal of this article is to present recent developments in erosion research and
associated particles in centrifugal slurry pumps. Solid particles in transported liquid cause …

Investigation of deflector geometry and turbine aspect ratio effect on 3D modified in-pipe hydro Savonius turbine: Parametric study

SA Payambarpour, AF Najafi, F Magagnato - Renewable Energy, 2020 - Elsevier
In this research, a 3D (three dimensional) modified in-pipe hydro Savonius turbine with a
deflector is studied experimentally and numerically. The new Savonius turbine has two …

Flow characteristics in a volute-type centrifugal pump using large eddy simulation

B Kye, K Park, H Choi, M Lee, JH Kim - … Journal of Heat and Fluid Flow, 2018 - Elsevier
The flow characteristics in a volute-type centrifugal pump operating at design (Q d= 35 m
3/h) and off-design (Q off= 20 m 3/h) conditions are investigated using large eddy simulation …

Experimental and numerical investigations of head-flow curve instability of a single-stage centrifugal pump with volute casing

X Li, Z Zhu, Y Li, X Chen - … , Part A: Journal of Power and …, 2016 - journals.sagepub.com
Unstable or flat head-flow curves can cause problems in parallel operations or in flat
systems. Despite the considerable efforts that have been devoted to the study of head-flow …

Numerical study of pressure fluctuation and unsteady flow in a centrifugal pump

L Bai, L Zhou, C Han, Y Zhu, W Shi - Processes, 2019 - mdpi.com
A pump is one of the most important machines in the processes and flow systems. The
operation of multistage centrifugal pumps could generate pressure fluctuations and …

Investigation of in-pipe drag-based turbine for distributed hydropower harvesting: Modeling and optimization

N Hasanzadeh, SA Payambarpour, AF Najafi… - Journal of Cleaner …, 2021 - Elsevier
Hydropower systems can provide a considerable proportion of sustainable and clean
energy. In the present study, the performance of a drag-based vertical axis in-pipe turbine is …

Effect of the blade loading distribution on hydrodynamic performance of a centrifugal pump with cylindrical blades

X Li, P Gao, Z Zhu, Y Li - Journal of Mechanical Science and Technology, 2018 - Springer
The effect of the blade loading distribution on head, radial force and pressure pulsation of a
low specific-speed centrifugal pump with cylindrical impeller blades were investigated in the …

[PDF][PDF] Internal flow structure, fault detection, and performance optimization of centrifugal pumps

ZM Tong, JG Xin, SG Tong, ZQ Yang, JY Zhao… - J. Zhejiang Univ. Sci …, 2020 - lcblzz.com
This review mainly summarizes the latest developments in the internal flow field and
external characteristics of centrifugal pumps. In particular, the latest findings of centrifugal …

Development of ultra-low specific speed centrifugal pumps design method for small liquid rocket engines

HI Kim, TS Roh, H Huh, HJ Lee - Aerospace, 2022 - mdpi.com
With the growth of the satellite industry, the demand for a propulsion system for small launch
vehicles and spacecraft has increased. Small liquid rocket engines may require Ultra-Low …