A review on cementitious materials including municipal solid waste incineration bottom ash (MSWI-BA) as aggregates

J Bawab, J Khatib, S Kenai, M Sonebi - Buildings, 2021 - mdpi.com
Waste management is a vital environmental issue in the world today. Municipal solid wastes
(MSWs) are discarded in huge quantities on a daily basis and need to be well controlled …

Artificial lightweight aggregates made from pozzolanic material: a review on the method, physical and mechanical properties, thermal and microstructure

DLC Hao, RA Razak, M Kheimi, Z Yahya… - Materials, 2022 - mdpi.com
As the demand for nonrenewable natural resources, such as aggregate, is increasing
worldwide, new production of artificial aggregate should be developed. Artificial lightweight …

Effect of microwave radiation temperature and content of different solid waste on the microstructure and physicomechanical properties of lightweight aggregates

M Franus, J Madej, R Panek, E Grabias-Blicharz - Ceramics International, 2024 - Elsevier
Microwave radiation in the production of lightweight aggregates, it has not yet been
thoroughly explored. Therefore, the main goal of the research is to analyze the possibility of …

Dynamic modulus and phase angle of asphalt concrete mixtures containing municipal solid waste incinerated fly ash as mineral filler substitution

R Joumblat, Z Al Basiouni Al Masri, A Elkordi - International Journal of …, 2023 - Springer
Waste and recyled materials have been introduced in asphalt concrete mixtures as
substitute for raw aggregates along with the efforts towards constructing sustainable …

Feasibility study of utilizing Autoclaved Aerated Concrete (AAC) waste for the production of cold bonded lightweight artificial aggregate using high volume fly ash …

AR Shrestha, J Xia, L Di Sarno, CS Chen - Construction and Building …, 2024 - Elsevier
Abstract Autoclaved Aerated Concrete (AAC) is a popular construction material used for
partitions and insulation in buildings. At the end of its service life, AAC (Autoclaved Aerated …

[HTML][HTML] Development and optimization of geopolymer-based artificial angular coarse aggregate using cut-blade mechanism

AS Kurzekar, U Waghe, K Ansari, AN Dabhade… - Case Studies in …, 2024 - Elsevier
This research introduces a novel approach to developing geopolymer-based artificial coarse
aggregate using a cut-blade mechanism, providing an innovative approach to traditional …

[HTML][HTML] The Basic Properties of Lightweight Artificial Aggregates Made with Recycled Concrete Fines

E Gosk, K Kalinowska-Wichrowska, M Kosior-Kazberuk… - Sustainability, 2024 - mdpi.com
The production of lightweight aggregate based on waste is an important step towards
sustainable and ecological construction. It contributes to reducing the negative impact of the …

Appraisal of geopolymer lightweight aggregates sintered by microwave radiations

N Saleem, K Rashid, N Fatima… - Journal of …, 2020 - jacf.sfulib3.publicknowledgeproject …
This work was designed for the production of geopolymer based lightweight aggregate
(LWA) using industrial by-products. Combination of fly ash (FA) and silica fume (SF) were …

Behavior of reinforced concrete beams containing lightweight aggregate in the tensile zone

J Khatib, A Jahami, O Baalbaki… - BAU Journal …, 2020 - digitalcommons.bau.edu.lb
In reinforced concrete design, the concrete in the tensile zone is assumed to be ineffective
and increase the dead load of the structural elements. In order to reduce the self-weight, this …

Incinerator bottom ash as a supplementary material for green concrete and mortar

D Raghavendher, S Kumar, D Singh - Materials Today: Proceedings, 2023 - Elsevier
With growing environmental concerns, effective waste management strategies are crucial. In
cities and suburban areas, the significant sources of such problems are Municipal Solid …