Phosphogypsum (PG), the main industrial by-product of phosphate fertilizer industry,
primarily consists of calcium sulfate dihydrate. However, it contains various impurities with …

Phosphogypsum (PG) is a by-product from the industry of phosphate fertilizer. Approximately
4–6 tonnes of PG are generated per tonne of phosphoric acid production. The continuous …

The utilization of multiple solid-waste-activated slags to prepare clinker-free binders has
garnered considerable interest due to their environmental friendliness and low cost. In this …

The phosphate industry produces a hazardous byproduct called phosphogypsum (PG). A
rising global stockpiling of PG poses severe threats to public health and the environment …

The use of phosphogypsum as an amendment to graded aggregate road base serves as an
alternative to traditional and recycled aggregate sources. This provides a solution to issues …

Phosphogypsum (PG) waste is a by-product generated from wet-process phosphoric acid
(H3PO4) manufacturing during phosphate rock decomposition. Worldwide, the annual …

In the previous studies, chemical, physical, and heat treatment methods are commonly used
to treat waste phosphogypsum (PG). This study reports a new method that uses biowashing …

Phosphogypsum can replace natural gypsum to produce hemihydrate gypsum. In order to
effectively reutilize phosphogypsum, the influence mechanism of the impurities in …

The production of phosphoric acid from natural phosphate rock by the wet process gives rise
to an industrial by-product called phosphogypsum (PG). About 5tons of PG are generated …

Landfilled phosphogypsum would cause severe environmental issues, but the waste can be
recycled for preparing excess-sulphate cement, an eco-friendly alternative to conventional …