Inductive fault current limiters: A review
A fault current limiter (FCL) is an effective means of limiting fault currents that is a promising
power system protection solution. This paper presents a comparative survey of research …
power system protection solution. This paper presents a comparative survey of research …
A DC-reactor-based solid-state fault current limiter for HVdc applications
A Heidary, H Radmanesh… - IEEE Transactions on …, 2019 - ieeexplore.ieee.org
Expansion of high-voltage dc (HVdc) systems to multi-terminal HVdc (MT-HVdc)
systems/grids considerably increases the short-circuit levels. In order to protect the emerging …
systems/grids considerably increases the short-circuit levels. In order to protect the emerging …
A self-activated fault current limiter for distribution network protection
Rapid protection of modern electric networks using fault current limiters (FCLs) is often
delayed and limited by the inherent controller, sensor, and power electronic unit delays. This …
delayed and limited by the inherent controller, sensor, and power electronic unit delays. This …
Further study of a novel inductive SFCL for multiterminal HVDC systems
Multiterminal high voltage direct current (HVDC) systems are developing rapidly lately.
However, the high rising rate of fault current and the lack of interrupting capacity of the …
However, the high rising rate of fault current and the lack of interrupting capacity of the …
Distribution system protection by coordinated fault current limiters
A Heidary, H Radmanesh, SH Naghibi… - IET Energy Systems …, 2020 - Wiley Online Library
The protection of distribution networks is one of the most substantial issues, which needs
special attention. Using appropriate protective equipment enhances the safety of the power …
special attention. Using appropriate protective equipment enhances the safety of the power …
Compound ferroresonance overvoltage and fault current limiter for power system protection
Power systems are subjected to various types of faults as well as ferroresonance
overvoltages. These results in the interruption of the normal operation of the power grid …
overvoltages. These results in the interruption of the normal operation of the power grid …
Non-inductive variable reactor design and computer simulation of rectifier type superconducting fault current limiter
T Hoshino, I Muta, T Nakamura… - IEEE transactions on …, 2005 - ieeexplore.ieee.org
A rectifier type superconducting fault current limiter with noninductive reactor has been
proposed by the authors. The concept behind this SFCL is that the high impedance …
proposed by the authors. The concept behind this SFCL is that the high impedance …
Parallel resonance type fault current limiting circuit breaker
H Radmanesh, SH Fathi - High Voltage, 2020 - Wiley Online Library
The main goal of this study is introducing a novel fault current limiter based on parallel
resonance structure (PRFCL) for high voltage application. During normal mode, the PRFCL …
resonance structure (PRFCL) for high voltage application. During normal mode, the PRFCL …
Design and analysis of a kA-class superconducting reactor
This paper presents the designs of kiloampere-class reactors with high temperature
superconducting (HTS) BSCCO tapes. The HTS solenoidal windings of the 100 A-class and …
superconducting (HTS) BSCCO tapes. The HTS solenoidal windings of the 100 A-class and …
Simulation and analysis for new bridge-type high temperature superconducting fault current limiter
J Chu, S Wang, J Qiu - 2012 Sixth International Conference on …, 2012 - ieeexplore.ieee.org
In this paper, a bridge-type high temperature superconducting (HTS) fault current limiter
(FCL) is presented. The working principle of this HTS FCL is analyzed in detail. Two anti …
(FCL) is presented. The working principle of this HTS FCL is analyzed in detail. Two anti …