Synthesis of nanocrystalline diamond embedded diamond-like carbon films on untreated glass substrates at low temperature using (C2H2+ H2) gas composition in …
B Paramanik, D Das - Applied Surface Science, 2022 - Elsevier
Diamond-like carbon (DLC) films with well distinguished nanocrystalline diamond (NCD)
grains embedded in the matrix are grown at∼ 300° C on glass substrates without any pre …
grains embedded in the matrix are grown at∼ 300° C on glass substrates without any pre …
N-and P-type doping of diamonds: A review
Diamond has been one of the most investigated ultrawide bandgap (UWBG)
semiconductors for optoelectronics, superconductors, energy, and quantum applications for …
semiconductors for optoelectronics, superconductors, energy, and quantum applications for …
Wettability of nanostructured surfaces
There are many studies in literature concerning contact angle measurements on different
materials/substrates. It is documented that textiles can be coated with multifunctional …
materials/substrates. It is documented that textiles can be coated with multifunctional …
Magnetron sputtering technique for analyzing the influence of RF sputtering power on microstructural surface morphology of aluminum thin films deposited on SiO2/Si …
S Asgary, E Vaghri, M Daemi, P Esmaili… - Applied Physics A, 2021 - Springer
In this research, aluminum (Al) thin films were deposited on SiO 2/Si substrates using RF
magnetron sputtering technique for analyzing the influence of RF sputtering power on …
magnetron sputtering technique for analyzing the influence of RF sputtering power on …
Effect of nitrogen (N2) flow rate over the tribological, structural and mechanical properties diamond-like carbon (DLC) thin film
In this article, nitrogen (N 2) doped diamond-like carbon (N-DLC) coatings are deposited by
Atmospheric pressure chemical vapor deposition (APCVD) technique at varying N 2 flow …
Atmospheric pressure chemical vapor deposition (APCVD) technique at varying N 2 flow …
Evaluation of the sp3/sp2 ratio of DLC films by RF-PECVD and its quantitative relationship with optical band gap
H Sheng, W Xiong, S Zheng, C Chen, S He, Q Cheng - Carbon Letters, 2021 - Springer
DLC has been attractive as semiconductor materials for solar cell due to its biological
friendliness, flexible microstructures, and especially its tunable band gap. In order to …
friendliness, flexible microstructures, and especially its tunable band gap. In order to …
Correlation between structural and mechanical properties of silicon doped DLC thin films
Silicon doped diamond like carbon (Si-DLC) thin films were deposited on SiO 2/Si
substrates with different H 2 flow rate. The deposited Si-DLC films were characterized by …
substrates with different H 2 flow rate. The deposited Si-DLC films were characterized by …
Characteristics of industrially manufactured amorphous hydrogenated carbon (aC: H) depositions on high-density polyethylene
A Catena, S Agnello, LM Rösken, H Bergen… - Carbon, 2016 - Elsevier
Industrially high-density polyethylene (HDPE) was successively covered by two types of
amorphous hydrogenated carbon (aC: H) films, one more flexible (f-type) and the other more …
amorphous hydrogenated carbon (aC: H) films, one more flexible (f-type) and the other more …
Structural and mechanical analysis of APCVD deposited diamond-like carbon thin films
In this study, diamond-like Carbon (DLC) thin film coatings are deposited by atmospheric
pressure chemical vapour deposition (APCVD) process by using C 2 H 2 and H 2 as …
pressure chemical vapour deposition (APCVD) process by using C 2 H 2 and H 2 as …
Parametric optimization of CVD process for DLC Thin film coatings: a comparative analysis
Diamond-like carbon (DLC) is becoming increasingly popular due to its several superior
mechanical, chemical, tribological and optical properties. However, achievement of these …
mechanical, chemical, tribological and optical properties. However, achievement of these …