[HTML][HTML] Grain refinement mechanism and its effect on mechanical properties and biodegradation behaviors of Zn alloys–a review
Along the way, investigations over the past few years have focused on developing new Zn-
based alloys as future materials for medical implants due to the poor mechanical and …
based alloys as future materials for medical implants due to the poor mechanical and …
A review of weldability of carbon steel in arc-based welding processes
The weldability of carbon steel is determined by carbon equivalent (CE) for
predicting/estimating preheat temperatures necessary for weld integrity of the weldment. The …
predicting/estimating preheat temperatures necessary for weld integrity of the weldment. The …
Exploring the potential of metal-cored filler wire in gas metal arc welding for ASME SA387-Gr. 11-Cl. 2 steel joints
This study explores the potential benefits of gas metal arc (GMA) welding for ASME SA387-
Gr. 11-Cl. 2 steel, with a focus on ensuring humane and environmentally friendly welding …
Gr. 11-Cl. 2 steel, with a focus on ensuring humane and environmentally friendly welding …
Influence of microstructural aspects on impact toughness of multi-pass submerged arc welded HSLA steel joints
L Lan, X Kong, C Qiu, D Zhao - Materials & Design, 2016 - Elsevier
Multi-pass submerged arc welding was performed on the HSLA steels using multi-
microalloyed electrodes in the present work, and three different heat input processes were …
microalloyed electrodes in the present work, and three different heat input processes were …
Nano-SiC reinforced Zn biocomposites prepared via laser melting: Microstructure, mechanical properties and biodegradability
Zn has been regarded as new kind of potential implant biomaterials due to the desirable
biodegradability and good biocompatibility, but the low strength and ductility limit its …
biodegradability and good biocompatibility, but the low strength and ductility limit its …
Experimental study on application of gas metal arc welding based regulated metal deposition technique for low alloy steel
In this work, a modified and advanced welding technique named regulated metal deposition
(RMD) has been implemented for joining ASTM A387-11-2 low alloy steel plates …
(RMD) has been implemented for joining ASTM A387-11-2 low alloy steel plates …
Effect of metal-cored filler wire on surface morphology and micro-hardness of regulated metal deposition welded ASTM A387-Gr. 11-Cl. 2 steel plates
Environmental and human-friendly welding is the need of the hour. In this context, this study
explores the application of the regulated metal deposition (RMD) technique for ASTM A387 …
explores the application of the regulated metal deposition (RMD) technique for ASTM A387 …
Study of the microstructure and mechanical property relationships of shielded metal arc and TIG welded S235JR steel joints
G İrsel - Materials Science and Engineering: A, 2022 - Elsevier
This study reports the investigation of the microstructural and mechanical characterizations
of low carbon steel EN10025 S235JR welded with tungsten inert gas welding (TIG or GTAW) …
of low carbon steel EN10025 S235JR welded with tungsten inert gas welding (TIG or GTAW) …
Low temperature impact toughness of high strength structural steel
L Tong, L Niu, S Jing, L Ai, XL Zhao - Thin-Walled Structures, 2018 - Elsevier
Impact toughness properties of four kinds of high strength steel (HSS) were investigated with
the nominal yield strength 460, 690, 800 and 960 MPa, respectively. The specialty of impact …
the nominal yield strength 460, 690, 800 and 960 MPa, respectively. The specialty of impact …
Influence of regulated metal deposition and gas metal arc welding on ASTM A387-11–2 steel plates: as-deposited inspection, microstructure, and mechanical …
Abstract In this work, 6-mm-thick ASTM A387-11–2 steel plates have been butt welded at
optimized parametric settings of current (A)= 100 A, voltage (V)= 13 V, and gas flow rate …
optimized parametric settings of current (A)= 100 A, voltage (V)= 13 V, and gas flow rate …