The influence of post-build processing on the hydrogen embrittlement behavior of additively
manufactured (AM) 316L stainless steel fabricated using laser powder bed fusion was …

The influence of a severe shot peening (SSP) treatment in corrosion resistance of AISI 316 L
austenitic stainless steel was studied by different electrochemical measurements in 3.5 …

The main subject of this study is to investigate the correlations between the evolution of
mechanical behavior and the multiscale microstructure of 316 L stainless steel obtained by …

Cr-rich stainless steel sheets exhibit superior corrosion resistance but low ductility, which
presents a trade-off between fabrication complexity and performance of the materials in …

Annealing softening is commonly observed in traditional coarse–grained materials. Herein,
an annealing–induced hardening mechanism in selective laser melted 316L stainless steel …

Ultrasonic joining (U-Joining) is applied to create reinforced hybrid joints between
unreinforced or fiber-reinforced polymers and surface-structured metals. While the feasibility …

Heat treatment was applied to 316L porous scaffolds with a negative re-entrant hexagonal
honeycomb (NRHH) structure made by selective laser melting (SLM) at temperatures …

Thanks to their admirable printability, AlSi10Mg and stainless steel 316L are among the
alloys that have been repeatedly fabricated by different 3D printing technologies. In this …

Additive manufacturing (AM) has revolutionized the manufacturing industry by offering
flexibility, customization, and rapid prototyping capabilities. However, ensuring the quality …

O processo da microlaminação a frio de arames promove o aumento da resistência
mecânica e diminuição da ductilidade do aço. Para restaurar essas propriedades …