This study presents an experimental framework with seventeen beams to investigate the
impact of loading type, configuration, and through-bolt anchorage on LC-GFRP (Low-Cost …

This study addresses the mechanical limitations of concrete fabricated with recycled brick
and concrete as partial replacement of coarse aggregates, which exhibit inferior strength …

Fiberglass prepared from broken waste glass can be used in epoxy asphalt mixtures for
performance enhancement and a toughening effect. There is no systematic study on the …

Raw-crushed wind-turbine blade (RCWTB), a waste from the recycling of wind-turbine
blades, is used as a raw material in concrete in this research. It contains not only fiberglass …

Recycled concrete, which is formed by replacing coarse aggregates in ordinary concrete
with recycled aggregates (RA), is of great significance for the secondary utilization of waste …

Reusing construction brick waste to fabricate new concrete is an economical and
sustainable solution for the ever-increasing quantity of construction waste. However, the …

In order to study the axial compression property of a GFRP (glass fiber-reinforced polymer)
tube-confined coal gangue steel fiber short concrete column, a test was carried out. The …

Lateral buckling, an essential mechanical phenomenon observed in composite beams
subjected to specific external loads and boundary conditions, is influenced by various …

In this paper, an innovative infill wall is proposed and examined experimentally and
parametrically. The proposed wall has an innovative design and is constructed with …

Carbon fiber-reinforced polymer (CFRP) has many advantages as a construction/structural-
strengthening material. However, there are still concerns regarding the long-term …