Influence of melt-mixing processing sequence on electrical conductivity of polyethylene/polypropylene blends filled with graphene

C Tu, K Nagata, S Yan - Polymer Bulletin, 2017 - Springer
In this paper, we produced composites of high-density polyethylene (PE)/polypropylene (PP)
filled with graphene by melt compounding. Comparing composites produced in three …

EMI shielding effectiveness study for innovative carbon nanotube materials in the 5G frequency region

A Amaro, A Suarez, A Tamburrano… - IEEE Transactions …, 2022 - ieeexplore.ieee.org
It is crucial to extend the electromagnetic compatibility (EMC) studies to the new frequency
regions where modern telecommunication systems operate, specifically those related to the …

Effect of injection molding conditions on crystalline structure and electrical resistivity of PP/MWCNT nanocomposites

M Zaccone, I Armentano, F Cesano, D Scarano… - Polymers, 2020 - mdpi.com
Polypropylene (PP)/multi-walled carbon nanotube (MWCNT) nanocomposites were
prepared by melt-mixing and used to manufacture samples by injection molding. The effect …

[HTML][HTML] Electrical, morphological and thermal properties of microinjection molded polyamide 6/multi-walled carbon nanotubes nanocomposites

S Zhou, AN Hrymak, MR Kamal - Composites Part A: Applied Science and …, 2017 - Elsevier
A series of polyamide 6/multi-walled carbon nanotubes (PA6/CNT) nanocomposites were
prepared using a masterbatch dilution process, followed by microinjection molding of a part …

Morphology, thermal, and electrical properties of polypropylene hybrid composites co‐filled with multi‐walled carbon nanotubes and graphene nanoplatelets

M Wegrzyn, B Galindo, A Benedito… - Journal of Applied …, 2015 - Wiley Online Library
In this study, nanocomposites of polypropylene (PP) with various loadings of multi‐wall
carbon nanotubes (MWCNT) and graphene nanoplatelets (GnP) were formed by …

Thermal and electrical conductivity of melt mixed polycarbonate hybrid composites co‐filled with multi‐walled carbon nanotubes and graphene nanoplatelets

M Wegrzyn, A Ortega, A Benedito… - Journal of Applied …, 2015 - Wiley Online Library
In this work, we present thermoplastic nanocomposites of polycarbonate (PC) matrix with
hybrid nanofillers system formed by a melt‐mixing approach. Various concentrations of multi …

Effects of hybrid fillers on the electrical conductivity, EMI shielding effectiveness, and flame retardancy of PBT and PolyASA composites with carbon fiber and MWCNT

IC Kim, KH Kwon, WN Kim - Journal of Applied Polymer …, 2019 - Wiley Online Library
The effects of hybrid fillers of carbon fiber (CF) and multiwall carbon nanotube (MWCNT) on
the electrical conductivity, electromagnetic interference shielding effectiveness (EMI SE) …

Electrical and morphological properties of microinjection molded polystyrene/multiwalled carbon nanotubes nanocomposites

S Zhou, AN Hrymak, MR Kamal - Polymer Engineering & …, 2016 - Wiley Online Library
Masterbatch dilution was utilized to prepare polystyrene/carbon nanotubes (PS/CNT)
nanocomposites for microinjection molding (µIM). The effect of processing parameters, such …

[HTML][HTML] Fracture mechanism and scratch behaviour of MWNTs reinforced 70/30 (wt/wt) PC/ABS blends and their nanocomposites

BLNK Sai, P Tambe - Advanced Industrial and Engineering Polymer …, 2022 - Elsevier
In this work, multiwalled carbon nanotubes (MWNTs) are dispersed in 70/30 (wt/wt)
polycarbonate (PC)/acrylonitrile butadiene styrene (ABS)(PC70ABS30) blends and their …

Influence of processing conditions on the mechanical behavior of MWCNT reinforced thermoplastic nanocomposites

S Doagou-Rad, A Islam, JS Jensen - Procedia Cirp, 2017 - Elsevier
The influence of the processing conditions and MWCNT content on the mechanical
properties of PA6, 6-based nanocomposites are investigated. In addition to the composition …