Moisture, heat, and light instabilities of halide perovskites (HPs) represent a serious Achilles'
heel that must be overcome, to enable future advancements in perovskite‐based …

The strength and deformation behavior of the aluminium alloy AA7075 was crucial
information for engineering and manufacturing design. Tensile tests were performed in a …

The effects of recrystallization annealing on the microstructure evolution of Inconel 617B
alloy pipes and its tensile behavior at 750° C were investigated. As the annealing …

Work hardening behaviour of the IN-617 alloy under tensile loading was studied in the
solution treated, aged, and cold worked conditions at room temperature (RT) and 700° C …

The present investigation finds the effect of electropulsing treatment on the mechanisms of
refining and reprecipitation of ordered L2 0 structure (B2) and its impact on tensile properties …

The microstructure evolution of IN617 during creep under 30 MPa, 23 MPa, and 16 MPa at
1000° C was characterized after creep ruptured tests and interrupted tests. As the applied …

In the present study, the uniaxial tensile flow stress behaviour and work hardening
behaviour of AZ31B alloy has been investigated across a wide range of temperature (25° C …

Hydrogen embrittlement of Ni-base corrosion resistant alloys (CRAs) can occur when
components under stress are exposed to hydrogen in deep sea oil wells. Ni-base CRAs …

The present article reviews plasticity, roughness, and oxide-induced crack closure and its di-
rect effect on fatigue crack propagation (FCP) problems. In such cases, plasticity-influenced …

The extensive growth in population and the resultant over-exploitation of resources have
affected our environment in a very detrimental manner. The extent of anthropogenic …