[HTML][HTML] Numerical modeling of the hydrodynamic stability in vertical annulus with heat source of different lengths
F Mebarek-Oudina - Engineering science and technology, an international …, 2017 - Elsevier
A numerical investigation of natural convection heat transfer stability in cylindrical annular
with discrete isoflux heat source of different lengths is carried out. The adiabatic unheated …
with discrete isoflux heat source of different lengths is carried out. The adiabatic unheated …
Investigation of rib's height effect on heat transfer and flow parameters of laminar water–Al2O3 nanofluid in a rib-microchannel
OA Akbari, D Toghraie, A Karimipour, MR Safaei… - Applied Mathematics …, 2016 - Elsevier
The laminar forced convection heat transfer of water–Al 2 O 3 nanofluids through a
horizontal rib-microchannel was studied. The middle section of the down wall of …
horizontal rib-microchannel was studied. The middle section of the down wall of …
The numerical modeling of water/FMWCNT nanofluid flow and heat transfer in a backward-facing contracting channel
AAAA Alrashed, OA Akbari, A Heydari… - Physica B: Condensed …, 2018 - Elsevier
In recent years, the study of rheological behavior and heat transfer of nanofluids in the
industrial equipment has become widespread among the researchers and their results have …
industrial equipment has become widespread among the researchers and their results have …
Simulation of copper–water nanofluid in a microchannel in slip flow regime using the lattice Boltzmann method
A Karimipour, AH Nezhad, A D'Orazio, MH Esfe… - European Journal of …, 2015 - Elsevier
Laminar forced convection heat transfer of water–Cu nanofluids in a microchannel was
studied utilizing the lattice Boltzmann method (LBM). The entering flow was at a lower …
studied utilizing the lattice Boltzmann method (LBM). The entering flow was at a lower …
Investigation of heat transfer enhancement in a forward-facing contracting channel using FMWCNT nanofluids
The turbulent forced convection heat transfer of water/functionalized multi-walled carbon
nanotube (FMWCNT) nanofluids over a forward-facing step was studied in this work …
nanotube (FMWCNT) nanofluids over a forward-facing step was studied in this work …
[HTML][HTML] Numerical study on flow separation in 90° pipe bend under high Reynolds number by k-ε modelling
The present paper makes an effort to find the flow separation characteristics under high
Reynolds number in pipe bends. Single phase turbulent flow through pipe bends is …
Reynolds number in pipe bends. Single phase turbulent flow through pipe bends is …
Effects of magnetic field on micro cross jet injection of dispersed nanoparticles in a microchannel
SA Bagherzadeh, E Jalali, MM Sarafraz… - International Journal of …, 2020 - emerald.com
Purpose Water/Al2O3 nanofluid with volume fractions of 0, 0.3 and 0.06 was investigated
inside a rectangular microchannel. Jet injection of nanofluid was used to enhance the heat …
inside a rectangular microchannel. Jet injection of nanofluid was used to enhance the heat …
Influence of T-semi attached rib on turbulent flow and heat transfer parameters of a silver-water nanofluid with different volume fractions in a three-dimensional …
H Alipour, A Karimipour, MR Safaei… - Physica E: Low …, 2017 - Elsevier
This study aimed at exploring influence of T-semi attached rib on the turbulent flow and heat
transfer parameters of a silver-water nanofluid with different volume fractions in a three …
transfer parameters of a silver-water nanofluid with different volume fractions in a three …
Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid
H Arasteh, R Mashayekhi, M Goodarzi… - Journal of Thermal …, 2019 - Springer
The present study aims to enhance the hydrothermal performance of a porous sinusoidal
double-layered heat sink using nanofluid. The optimum thickness of metal foam (nickel) for …
double-layered heat sink using nanofluid. The optimum thickness of metal foam (nickel) for …
Efficiency assessment of using graphene nanoplatelets-silver/water nanofluids in microchannel heat sinks with different cross-sections for electronics cooling
M Goodarzi, I Tlili, Z Tian, MR Safaei - … Methods for Heat & Fluid Flow, 2020 - emerald.com
Purpose This study aims to model the nanofluid flow in microchannel heat sinks having the
same length and hydraulic diameter but different cross-sections (circular, trapezoidal and …
same length and hydraulic diameter but different cross-sections (circular, trapezoidal and …