Research on corrosion resistance of cast aluminum alloys is reviewed in this article. The
effect of the main microstructural features of cast aluminum alloys such as secondary …

This study addresses the behavior of an aluminum alloy and its components in conditions
simulating the presence of atmospheric salts. The corrosion of synthetic intermetallic …

The anodised layer of Al-Si alloys produced by rheocasting was studied and compared to
anodised traditional liquid casting in this paper. The anodising was performed in 1.0 MH 2 …

This research investigated the corrosion behavior and susceptibility to stress corrosion
cracking (SCC) of a high-pressure die-cast secondary AlSi9Cu3 (Fe) alloy in 3.5% NaCl …

Natural convection is present in all liquid alloys whereas forced convection may be applied
as the method to improve material properties. To understand the effect of forced convection …

In recent years, the increasing need to use recycled aluminum alloys has driven the
exploration of advanced processes. Among these, thixocasting is attractive due to its …

Electropolymerization of polypyrrole coatings in the presence and absence of sodium nitrate
was applied on rheo-cast Al-4.5% Si alloy and pure aluminum. The results showed that the …

The solidification of AlCuSi alloys with Mn and Fe was studied by rotating a magnetic field to
understand the effect of melt flow. The specimens solidified with a forced convection, low …

During rheocasting of Al alloys, the component's surface can be enriched in Fe-rich
intermetallics due to the surface liquid segregation or the interaction with the die material …

Four-point bending fatigue tests were performed on semi-solid Al–7Si–Mg castings with
varying magnesium contents and heat treatment conditions. Additionally, the effect of …