Tailoring the strengthening mechanisms of high-entropy alloys toward excellent strength-ductility synergy by metalloid silicon alloying: A review
Metalloids and transition/refractory elements typically differ significantly in the electronic
structure and atomic size, allowing for stronger solid-solution hardening in high-entropy …
structure and atomic size, allowing for stronger solid-solution hardening in high-entropy …
Exceptional strength-ductility synergy in the novel metastable FeCoCrNiVSi high-entropy alloys via tuning the grain size dependency of the transformation-induced …
In-depth knowledge of the coupling between grain refinement and the transformation-
induced plasticity (TRIP) effect in metastable alloys is a viable approach for the improvement …
induced plasticity (TRIP) effect in metastable alloys is a viable approach for the improvement …
Low cycle fatigue properties of CoCrFeNiMn high-entropy alloy with heterogeneous microstructure
Heterogeneous microstructure is a hot topic in materials science which facilitates tackling
the dilemma of strength-ductility trade-off in engineering materials including high-entropy …
the dilemma of strength-ductility trade-off in engineering materials including high-entropy …
The pre-corrosion fatigue behavior of 321 steel coated by laser additively manufactured FeCoNiCrMn high-entropy alloy
Corrosion caused by salt-spray and fatigue failure resulting from cyclic sea wave and strong
storm are common degradation problem in offshore structural steels, and their interaction …
storm are common degradation problem in offshore structural steels, and their interaction …
[HTML][HTML] Study on the Microstructure, Mechanical Properties, and Corrosion Behavior of 900° C-Annealed CoCrFeMnNiSix (X= 0, 0.3, 0.6, 0.9) High-Entropy Alloys
C Jiang, R Li, Z Zong, W Li, Y Zhang, T Li - Entropy, 2024 - mdpi.com
In this study, a series of CoCrFeMnNiSix (x= 0, 0.3, 0.6, 0.9) high-entropy alloys (HEAs) were
prepared by suspension melting of cold crucible, annealed at 1000° C, and then quenched …
prepared by suspension melting of cold crucible, annealed at 1000° C, and then quenched …
[HTML][HTML] Effect of minor addition of silicon on deformation behaviour and texture evolution in CrFeNi medium entropy alloy
The present investigation systematically explores the effect of a minor addition of silicon on
the microstructure, texture, and mechanical properties of FCC CrFeNi medium entropy alloy …
the microstructure, texture, and mechanical properties of FCC CrFeNi medium entropy alloy …
Microstructure Evolution and Wear Mechanism of Si-Effected Al0. 6CoCrFeNi High-Entropy Alloy Coatings by Laser Cladding
Y Xu, Y Wang, R Hua, Y Sun, G Wang, J Zou, Q Zhao… - JOM, 2024 - Springer
Abstract Al 0.6 CoCrFeNiSix high-entropy alloy coatings were obtained by laser cladding on
the surface of 45# steel, and their microstructure evolution and wear mechanism were …
the surface of 45# steel, and their microstructure evolution and wear mechanism were …
Fatigue Behavior of High-Entropy Alloys
S Chen, X Fan, H Shortt, B Steingrimsson, W Li… - arXiv preprint arXiv …, 2024 - arxiv.org
High-entropy alloys (HEAs) refer to alloys composed of five or more elements in equal or
near-equal amounts or in an atomic concentration range of 5 to 35 atomic percent (at%) …
near-equal amounts or in an atomic concentration range of 5 to 35 atomic percent (at%) …