Grain growth is an unavoidable phenomenon occurring during processing of
multicomponent high-entropy alloys (HEAs) and medium-entropy alloys (MEAs), which …

Despite their complex composition, high-entropy alloys (HEAs) have a simple structure and
have been extensively researched for their ability to achieve unique properties through …

Al 0.3 CoCrFeNi is one of the widely studied high-entropy alloys (HEAs) due to the superior
properties; however, its strength at room temperature is not satisfactory. The thermo …

This study presents an innovative solution to address the performance degradation of eddy
current dampers (ECD) at high speeds. It replaces the traditional copper conductor with a …

The impact of warm-rolling at 773 K to 76% and 90% thickness reduction on the
microstructure and mechanical properties of an equiatomic CrMnFeCoNi high entropy alloy …

Dynamic compression experiments are conducted on a heterogeneous-structured
CrMnFeCoNi high-entropy alloy (HEA) at different strain rates (1000–5000 s− 1) and …

An overview of the severe plastic deformation (SPD) of high entropy alloys (HEAs) is given
with a focus on microstructure and texture evolution, phase transformation, strength and …

Annealing is widely used in the thermomechanical processing of metallic alloys. Usually,
ductility enhances while strength decreases because defects annihilate with the increase in …

An equiatomic CoFeNiMnV high-entropy alloy with a face-centred cubic phase was cast and
cold-rolled. The influence of recrystallisation and σ phase precipitation on the mechanical …

A novel NiAlCrFeMo high entropy superalloy was prepared using the vacuum arc melting
method, followed by annealing at 800° C, 1000° C, and 1200° C for 10 h. The …