PEO coatings have been developed on a secondary cast Al-Si alloy, using a novel
aluminate-based electrolyte, containing Na 4 P 2 O 7, Na 2 WO 4 and K 2 TiF 6. The …

The most important commercial casting alloys are those based on Al–Si. Their technical
characteristics are highly connected to their as-cast microstructure, which is translated by the …

The influence of the initial microstructure of the aluminium alloy Al–12Si on the corrosion
resistance of the microarc oxidation (MAO) coating has been studied. It has been …

Aluminium-based alloys are considered lengthily for many applications in engineering areas
due to their good mechanical properties. Machining these alloys had attracted the attention …

In the current study, three different combinations of dual-phase (DP) steels, ie, ferrite–
pearlite, ferrite–bainite, and ferrite–martensite containing the nearly same amount of second …

Magnesium (Mg) alloys are promising biodegradable implant materials. If successful, they
do not require second surgical operation for their removal. However, the focus of this study is …

Surface roughness influences the mechanical performance of a part. A rougher surface is
prone to cracks and corrosion due to increased friction and harsh environments in transport …

The objective of this study was to pick the qualities of an AA2024 and silicon nitride-upheld
composite that might be used in various present-day applications. Individual and different …

The microstructural features of binary Al-Si alloys such as eutectic Si morphology, size and
distribution of secondary phases, and intermetallic compounds largely govern the corrosion …

A roll of this study of focus to choose in qualities of an Al 2024 lithium and silicon nitride-
reinforced composite that might be used in various industrial applications. Individual and …