Liquid-metal embrittlement (LME) of galvanized (Zn-coated) advanced high-strength steels
is a long-known problem in materials science. Here we reveal the initial microstructural …

In recent years, to reduce cars costs, research has been conducted on dual-phase steels
with low manganese content (below 1.0%). This study investigated the influence of …

Main problem buku ini diawali dari kegelisahan penulis terhadap dinamika keilmuan Islam
yang terstagnansi oleh situasi problematis tertentu. Secara internal, terdapat realitas …

Hot rolled ultra-high strength steel with a gauge range of 3–10 mm (0.118¨–0.395¨) was
developed using conventional slab caster and hot strip mill technology at Stelco Inc.(Stelco) …

Road safety problem is still topical, especially since the number of vehicles and the volume
of traffic are increasing. It is possible to increase the safety of road users through systemic …

The paper is concerned with the effect of punch angle (0°, 4°, 8°, 16°), sheet thickness (0.8,
2 mm), and punch speed (25, 37.5 mm/min) on the force formation and noise in the blanking …

In the continuum of time and technological advancement, the use of metals, specifically
carbon steel, has significantly increased as primary materials in various operational and …

Trade-offs between different definitions of fairness plague many machine learning
applications, from mortgage lending, to hiring algorithms and recidivism prediction tools …

Stelco has developed a suite of Advanced High-Strength Steels (AHSS) grades with tensile
strength greater than 1000 MPa to meet standard automotive specifications and for unique …

Advanced high-strength steel (AHSS) is being used increasingly often in the structure of
means of transport. Welds made of these steels can crack in the heat-affected zone (HAZ) …