Flat-gain L-band amplifier containing AlPO4 units in aluminophosphosilicate erbium-doped fibers
We present a flat-gain single-stage L-band erbium-doped fiber amplifier (EDFA) with a gain
ripple of±0.7? dB from 1580 to 1615? nm, by using aluminophosphosilicate erbium-doped …
ripple of±0.7? dB from 1580 to 1615? nm, by using aluminophosphosilicate erbium-doped …
Classification of the temperature-dependent gain of an erbium-doped fiber amplifier by using data mining methods
In this study, the experimental results of an erbium-doped fiber amplifier (EDFA) system
designed and experimentally installed in the C-band were classified by using data mining …
designed and experimentally installed in the C-band were classified by using data mining …
The noise figure and gain improvement of double‐pass C‐band EDFA
In this study, the noise figure (NF) improvement is demonstrated in double‐pass C‐band
erbium‐doped fiber amplifier. It is used the short length of unpumped erbium doped fiber …
erbium‐doped fiber amplifier. It is used the short length of unpumped erbium doped fiber …
Fuzzy logic‐based automatic gain controller for EDFA
M Yucel - Microwave and Optical Technology Letters, 2011 - Wiley Online Library
In this study, the fuzzy logic (FL)‐based automatic gain controller (AGC) is designed to
obtain a fixed gain level of erbium‐doped fiber amplifiers along C band based on …
obtain a fixed gain level of erbium‐doped fiber amplifiers along C band based on …
Gain and noise figure analysis of erbium doped fiber amplifier based on double pass configuration using forward pumping
In this paper, gain and noise figure of Erbium Doped Fiber Amplifier (EDFA) is analyzed
based on double pass with Wave Selective Coupler (WSC). The main contribution in this …
based on double pass with Wave Selective Coupler (WSC). The main contribution in this …
[PDF][PDF] Intelligent modelling of alpha (α) parameter; comparison of ANN and ANFIS cases
In the last decade, intelligent models [1-33] are started to use for system design and
simulation in addition to the developed theoretical models [34-58] in semiconductor lasers …
simulation in addition to the developed theoretical models [34-58] in semiconductor lasers …
Adaptive Neuro-Fuzzy Based Gain Controller for Erbium-Doped Fiber Amplifiers.
Erbium-doped fiber amplifiers (EDFA) must have a flat gain profile which is a very important
parameter such as wavelength division multiplexing (WDM) and dense WDM (DWDM) …
parameter such as wavelength division multiplexing (WDM) and dense WDM (DWDM) …
Optimization of the three stages L band EDFA
M Yücel, HH Göktaş, G Akkaya - 2012 20th Signal Processing …, 2012 - ieeexplore.ieee.org
In this study, fiber lengths of each stage of the three stages L band erbium doped fiber
amplifier (L-EDFA) and the pump laser power are optimized to achieve the maximum gain …
amplifier (L-EDFA) and the pump laser power are optimized to achieve the maximum gain …
Optical gain model proposed with the use of artificial neural networks optimised by artificial bee colony algorithm
This study presents a simple and accurate optical gain model for a quantum-cascade laser
(QCL) based on artificial neural networks (ANNs). The training process is performed with …
(QCL) based on artificial neural networks (ANNs). The training process is performed with …
A complete CAD model for type-I quantum cascade lasers with the use of artificial bee colony algorithm
In this study, a simple and a single complete GAD model is obtained for type I quantum
cascade laser based on characteristic quantities (optical gain, refractive index change …
cascade laser based on characteristic quantities (optical gain, refractive index change …